Examples of using Manometer in English and their translations into Norwegian
{-}
-
Colloquial
-
Ecclesiastic
-
Ecclesiastic
-
Computer
Manometer for measuring pressure.
Technical description- Manometer.
Manometer for measuring pressure Cars 1.
High/low pressure indicated by Manometer.
Manometer and pressure/ flow adjustment.
Foot pump double cylinder with manometer.
The electrocontact manometer is reliable and simple.
Interface panel, remote control manometer.
Portable digital manometer for simple pressure measurements.
The air pressure can be adjusted individually via a manometer.
Portable digital manometer for simple pressure measurements.
It consists of an inflatable cuff,which is connected to a manometer.
Handheld digital manometer for a range of pressure measurements.
Supplied with carbon filter, CO2 manometer and drip tray.
Handheld digital manometer for a range of pressure measurements.
Foot pump single cylinder with manometer More details.
Visible manometer is attached for the control of oil pressure coefficient;
You are here: Hoses(high pressure)> Measuring, coupling and manometer> TEST COUPLING M16 x 2.
Portable digital manometer for simple pressure measurements.
Pressure adjusting of the homogenizing valve is by manual control,with sanitary diaphragm manometer.
Manometer with quick coupling for regulated boiler pressure up to 10 bar.
The main criterion of a vibration-proof manometer is the tightness and corrosion-resistant steel of the body.
To ensure accurate adjustment, it is recommended to adjust HAQ position andat the same time read the target chamber pressure by using the manometer.
The gun is supplemented with a manometer that allows you to monitor the level of pressure in the air tank.
With the CM Classic you have a solid, professional measurement instrument- equipped with a mechanic manometer with overpressure protection up to 2.5 bar.
The pressure is read out on the manometer and in case it is higher than 0.25 bar from the filter measured on a clean filter, backwashing should be performed.
In this category, indirectlygeneral technical and working instruments such as a manometer TM-510, TV-510, which are the most popular category.
Thanks to the manometer on the E61 group you can measure the real pressure on the coffee puck having a much more precise and accurate control of the coffee extraction.
The input pressure on the machine(displayed on the manometer) must be adjusted according to the size of the lower platen.
In the bigger products the pressure and the suction side of refrigerant pressure is measured separately for each compressor andis shown on an easy to read manometer*.