Examples of using Remote access server in English and their translations into Dutch
{-}
-
Colloquial
-
Official
-
Ecclesiastic
-
Medicine
-
Financial
-
Computer
-
Ecclesiastic
-
Official/political
-
Programming
If you select IPv6 Remote access server, you must also specify an IPv6 prefix.
If you enable this option, you may not be able to connect to other remote access servers.
Each remote access server has to have its‘Enable IP Routing' option clicked.
On the General tab, click IPv6 Router or IPv6 Remote access server, or both, depending on your requirements.
Each remote access server must be configured to handle the right number of connections.
This is a common occurrence when the computer is a file server or a remote access server that serves multiple clients.
By configuring RRAS to act as a remote access server, you can connect remote
at least one analog modem at the remote access server.
Enables remote access servers and Internet Authentication Service(IAS)
The remote access client receives verification that the remote access server that it is dialing in to has access to the user's password.
The remote access server must be using a V.90 digital switch
Specifies whether this computer is enabled as a remote access server for IPv6 traffic, which supports either dial-up
a virtual circuit to a port on a remote access server.
On the Managing Multiple Remote Access Servers page, select whether you want to use a centralized RADIUS server to authenticate your network clients.
infrastructure to connect to a remote access server.
The remote access server answers the call,
The security settings you assign to a dial-up networking entry must match the settings on the remote access server to which this entry corresponds.
RAS(Remote Access Server) This is a general term for any server that offers remote access to a network over phone line,
When a BAP-enabled remote access client requests another connection, the remote access server sends back a message that contains the phone number to dial for the new connection.
Unauthenticated access with remote access clients can occur when the authentication protocols configured by the remote access client do not match those configured on the remote access server.
Before you configure an RRAS server as a remote access server, you must configure the TCP/IP settings for the Internet or perimeter network interface and for the intranet interface.
password combination you provided is not recognized, or the selected authentication protocol is not permitted on the remote access server.
In dial-up networking, a remote access client makes a dial-up telephone connection to a physical port on a remote access server by using the service of a telecommunications provider, such as analog telephone or ISDN.
If you have more than one remote access server, instead of administering the network policies of all the remote access servers separately,
the clients in question can use the existing VPN connection to to forward their needs to access existing resources to the remote access servers.
logical connection between the remote access server and the remote access client is facilitated by dial-up equipment installed at the remote access client, the remote access server, and the WAN infrastructure.
traffic to the logical interface of a remote client is forwarded to the remote access server.