Examples of using Process temperature in English and their translations into French
{-}
-
Colloquial
-
Official
Switch Process temperature -50 °C.
To the ratio(A) over the process temperature.
Process temperature up to 250 °C.
Maintaining process temperature.
Process temperature not Ex version.
The range of the process temperature is -50.
Process temperature Process temperature -50.
Why calibrate process temperature sensors?
Process temperature up to 250 °C Very high repeatability.
Low process temperature approx. 70 °C.
Reduction of production costs Low process temperature.
Capture process temperature readings.
Cause: Over-cured surface. Solution:Decrease process temperature.
The process temperature is approx. 85 °C.
Solution: Increase heating time, or increase process temperature.
The process temperature is around 20°C.
The process temperature is +40° to +80°C.
It demands more time to act, when the process temperature is lower.
Extended process temperature up to +250 °C/ +482 °F.
Selection criteria for dial thermometers(2): process temperature.
Process temperature in the connected sensor 25 C 5 C 77 F 9 F.
In the case of heating, the process temperature shall be higher than 150°C.
Process temperature PTFE: -40 +180 C/ -40 +356 F for remote versions.
Dual Output- the primary control output will regulate the process temperature.
The process temperature corresponds to the calibration temperature. .
Cause: Excessive temperature. Solution:Reduce process temperature.
Process temperature for low pressure version: -200 to +200°C(-328 to +392°F.
Product vitamin C is conserved as the process temperature is low.