Examples of using Process temperature in English and their translations into Swedish
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Ecclesiastic
-
Official/political
-
Computer
-
Programming
-
Political
Process temperature controllers heating/ cooling.
Hence, you can control the process temperature accurately.
Typical process temperatures are approximately 60°C.
Aluminium wire is used for low process temperatures.
Dimension for process temperature up to 100 °C(212 °F).
Can the MoniTrace 200N controller be used for Process Temperature Maintenance?
Withstands high process temperatures and long process times.
The reaction vessel was placed in a water bath to control the process temperature.
Dependent on ambient and process temperature being equal.
For process temperatures up to 150 °C
Long-term exposure and higher process temperature were of particular interest.
High process temperatures can even lead to the destruction of thermal sensitive extracts.
SIP(Sterilization-in-Place): Suitable for process temperatures up to 130 °C.
Non-hazardous process temperature 0- 100 degC(other temperatures on request).
A quality product that requires precise control of the process, temperature and humidity.
Process temperatures temperature in the range of 60 to 80°C are beneficial to enhance the extract yield.
Designed for use at a continually high process temperature of up to 135Â °C 6 bar.
but also the process temperature.
Plasma allows to decrease significantly the process temperature compared to the thermal CVD process. .
A built-in Pt 1000 RTD compensates the measured conductivity for changes in process temperature.
Ecopulp is the first enzyme to tackle today's high process temperatures and alkalinity.
Reapply the heat energy to the disinfector to reduce the energy required to attain the disinfection process temperature.
such as peroxide concentration, process temperature, sonication time
only an additional 5°C(9°F) to the water to attain the disinfection process temperature.
Sonication allows to prepare a stable graphene dispersion at low process temperature of approx.
are equipped with cooling jacket to control the process temperature.
tank heating and process temperature maintenance of syrup, silage and caustic lines.
During the ultrasonic extraction procedure, a continuous rapid heat dissipation was ensured to maintain the process temperature below 30°C.
PH sensor with integral temperature measurement, optimised for use with clear process water and changing process temperature of up to 80 °C/6 bar.
optimised for use with clear process water and changing process temperature of up to 80 °C/6 bar.