Examples of using Compressive strength in English and their translations into German
{-}
-
Colloquial
-
Official
-
Ecclesiastic
-
Medicine
-
Financial
-
Ecclesiastic
-
Political
-
Computer
-
Programming
-
Official/political
-
Political
Cured concrete slabs vary widely in compressive strength;
It has a high compressive strength and can therefore carry more load.
The load-bearing layer providing the necessary compressive strength.
Compressive strength is a key value for the design of open pits and underground mines.
High level of distortion resistance due to the steel's excellent compressive strength.
People also translate
Compressive strength was a very important factor when choosing a polymer to replace the titanium.
The salt mined here has an unconfined compressive strength of 10 MPa. Press Media.
Optimization of compressive strength fc, 0,d in glued-laminated timber according to SIA 265 table 7.
Extremely high wear resistance,excellent toughness and very high compressive strength.
The result: poor tensile and compressive strength, excessive sulfate content, and advanced carbonation.
They are toughened paste adhesive with superior dispense rate andhigh compressive strength potting compound.
Rock types up to class 6 or compressive strength 100 MPa can be crushed using the angular edges and vibration.
Up to eight times lighter in weight than steelor brass with higher thermal performance and similar compressive strength.
It is corrosion-resistant, durable, has enormous compressive strength and is ideally suited to high levels of groundwater.
BÖHLER S790- High speed steel produced bypowdermetallurgy methods with good red hardness, compressive strength and wear resistance.
Through their high temperature resistance and compressive strength they offer the ideal conditions for use in die casting molds.
By this way the space between the covering fabric layers couldbe extended considerably without reducing the required compressive strength.
Its high compressive strength and low heat capacity limit its increase in temperature and the resulting expansion.
Parts machined fromDuratron stock shapes provide greater compressive strength and higher impact resistance than most advanced engineering plastics.
Compressive strength at 10% deformation(according to EN 826) has only limited significance, because the test consists of only one static load test.
LOCTITE liquid shims are epoxy-based materials that provide not only high compressive strength, but also a balance between open assembly time and strength. .
For the requirement of high compressive strength and filtration requirements of uniform intensity filtering environment, it is a new ideal filter material.
Much higher water/cement ratios;- presence of binding ultra-fine aggregate(bentonite);- lower compressive strength;- long movement times after the suspension is pumped into the trench.
Because granite has a higher compressive strength than limestone(160- 240 N/mmÂ2 instead of 80- 180 N/mmÂ2) the builders mainly used this type of rock.
GS-80's high compressive strength minimizes the risk of fracturing the restoration.(1) High compressive strength ensures a tough and durable long lasting restoration.
This structure delivers high compressive strength at reduced material costs, as wastage is reduced to a minimum through the use of loop structures.
The mechanical compressive strength of Biodentine is based on the purity of the calcium silicate, which is achieved by Active Biosilicate Technology™ Septodont.
The torsion resistance and compressive strength of the doors is ensured by the galvanized or primed 1.5 mm sheet metal and the door leaf with a thickness of 63 mm.
Advantages are its heavy compressive strength and high corrosion resistance which makes the conduit resistant even against aggressive substances.