Examples of using Compressive strength in English and their translations into Chinese
{-}
-
Political
-
Ecclesiastic
-
Programming
High compressive strength quickly- over 2,000 psi in one hour.
Sheath insulation(generally greater than 100mω) and compressive strength(500V above 1500V below).
Compressive strength: Ability of bearing the maximum pressure(normal temperature).
Sheath insulation(generally greater than 100mω) and compressive strength(500V above 1500V below).
The compressive strength of the materials is different from their tensile strength. .
Because of its special structure, can improve compressive strength, paper honeycomb plate can reduce costs.
Its compressive strength is higher than virtually all melted and cast or forged metals and alloys.
It has good processing performance and compressive strength and is used for the production of internal volume 500!?
The compressive strength varies from stone variety to origin and is about 1000-3000 kg/cm.
While talking about metals it is important to note that the compressive strength of that metal is taken into consideration.
Its prominent compressive strength and bending resistance are the most important characteristics of box packing materials.
Type A corrugated board has the highest flat pressure andhigh compressive strength, while type B is the opposite.
To further retain the compressive strength under water attack, the team added silica fume.
(1) high strength, due to its unique corrugatedstructure than the same diameter of the cement pipe compressive strength of more than 15 times.
The compressive strength varies according to the variety and origin of the stone, about 1000-3000 kg/flat method cm.
It is welded by“gas flame fusion welding technology” andhas high compressive strength(≥1.2Mpa), which is safe and watertight.
Compressive strength is the ability of material or structure to carry the loads on its surface without any crack or deflection.
When the sludge content is higher than 30%, the compressive strength of the sludge brick can not reach the performance standard of the brick.
Copper jacket has a certain mechanical strength, can meet the requirements of construction,generally its compressive strength should be≥ 0.3MPa.
MOC has a much higher compressive strength than conventional cement and this impressive strength can be achieved very fast.
When fly ash and silica fume were combined with MOC paste(15% of each additive),full compressive strength was retained in water for 28 days.
The high temperature compressive strength index of the refractory material can reflect the change of the bonding state of the product at high temperature.
UPW grade resin has a very high ion conversion rate(95% minimum),excellent conductivity and TOC cleaning characteristics and superior compressive strength.
All aluminas are very hard and wear resistant,with high compressive strength even against extreme temperatures and corrosive environments.
The compressive strength with a 95% guaranteed rate measured according to the standard experimental method is taken as the concrete strength grade.
At present, corrugated boxes are being developed to specifications, standardization, functional specialization,weight reduction and compressive strength improvement.
The improvement to compressive strength enables ready mixed concrete producers to optimize their mix design, which typically includes reducing cement content.
High bonding strength is not necessarily high compressive strength, low compressive strength is not necessarily low bond strength. .
Concrete compressive strength for general construction varies from 15 MPa(2200 psi) to 30 MPa(4400 psi) and higher in commercial and industrial structures.