Examples of using Compressive strength in English and their translations into Spanish
{-}
-
Colloquial
-
Official
Compressive strength 266/261 MPa photo-/ auto-polymerisation.
Pit and fissure sealants; compressive strength; in vitro.
Compressive strength at 10% deflection or yield, Vertical.
Soft formation with low compressive strength and high drillability.
Compressive strength is measured in pounds per square inch(PSI).
People also translate
Soft formations with low compressive strength and high drillability.
Compressive strength, impact resistance, coefficient of friction.
Low e-module in spite of high compressive strength.
Hardness, compressive strength, elastic modulus, resin composites.
Outstanding mechanical properties, compressive strength over 90MPa.
The compressive strength, however, is approximately ten times as high.
ATM-05 Soft formation with low compressive strength and high drillability.
High compressive strength and dimensional stability up to 20,000 kg/m².
Key words: Fluorides, pit andfissure sealants, compressive strength.
It has great compressive strength and is three time more rigid than steel.
The finished sand has uniform particle size and high compressive strength.
Has the compressive strength of your cartons met the customer's requirements?
Soft-medium to hard formations with high compressive strength and low abrasiveness.
High compressive strength 7 Low carbon emission and environmental protection.
Formation Soft to medium hard formation with low compressive strength with hard layer.
Soft formation with low compressive strength and interbedded with hard layers.
RX212 RX282 Medium to hard formation with high compressive strength& rock bit.
Applied Material: ore with compressive strength less than 280 Mpa, rock, slag. Introduction.
Key words: Fluorides, pit andfissure sealants, compressive strength, in vitro.
Feature: resistant to impact/ high compressive strength, better than ordinary hollow wallboard.
Safe construction elements thanks to high compressive strength and thermal endurance.
Soft to Medium formation with low compressive strength interbedded with hard layers.
These bits are used to drill low compressive strength, very soft formations.
Products Swivel joints Rotatable with high compressive strength and thermal endurance.
