Examples of using Left position in English and their translations into German
{-}
-
Colloquial
-
Official
-
Ecclesiastic
-
Medicine
-
Financial
-
Ecclesiastic
-
Political
-
Computer
-
Programming
-
Official/political
-
Political
DIP switch in left position: OFF.
Left position away from the key chain hook.
Make sure the override knob(54) is located in the left position.
The left position is"ineffective", while the right position is"effective.
Insert the"Jumper" in the left position facing the terminals.
Left position(“OFF”), indicating LED off the microphone is switched off.
After starting the engine, move the choke lever back into the left position.
Left position closed Right position open Fully to the right.
For this purpose, set the voltage selector switch to the left position 115 V.
Left position: Gentle crossfading Right position: Sudden crossfading.
To switch on the siren, set the switch“SIREN” (7) to the left position.
S slide switch is in the left position, i.e. that the key lock function is deactivated.
In case of supply via batteries: set the switch to the left position“BATT”.
When the switch(12) is in the left position, the mic and talkover are both off.
For the time being,switch off the DJ MIC channel with the selector switch(12) left position OFF.
Eutelsat 33D after replacing left position 33 degrees East longitude and went to the East.
To deactivate the key lock, move the s slide switch back to the left position.
When the MIC/TALKOVER(14) switch is in the left position, the mic and talkover are both off.
Create a new sequence with cue 1 thatturns on all the fixtures and uses the Stage Left position.
When performing left bevel cuts, set it to the left position as shown in the figure.
CH 3 left position for the unit at the input PHONO 3 rightposition for the unit at the input LINE 3.
As stand-alone PA subwoofer,set the DSP MODE switch to the left position MANUAL.
Between the left position and the middle position you have the normal area where you control the air input.
To use this feature the adjacent slide switch must be placed to the left position see previous section.
CH 2 left position for the unit at the input PHONO 2 centreposition for the unit at the input LINE 2 right position for the integrated MP3 player.
Ignition vent(A) and air vent(B) Left position closed Right position fully open.
The master output can be switched to mono with the MONO/STEREO selector switch(5) switch set to the left position.
We started talking about how anyone hardly ever used the left position, even though you can perform independent actions with it.
We thought maybe you could aim with the analogue stick and move with the+Control Pad in the left position.
Use the left position for smooth crossfading(gradual transition) e.g. for long mixes and the right position for sharp crossfading(abrupt transition) e.g. for scratching and cutting.