Examples of using Lock ring in English and their translations into German
{-}
-
Colloquial
-
Official
-
Ecclesiastic
-
Medicine
-
Financial
-
Ecclesiastic
-
Political
-
Computer
-
Programming
-
Official/political
-
Political
With lock ring, rotor hub spline.
Fit a new sprocket and secure the lock ring.
F Lock Ring and O-ring Kit Code.
Bags with heads 10* 37 and lock ring stainless steel.
One Lock Ring is enclosed with each s-mount lens.
The depth can be adjusted by turning the lock ring.
Campagnolo Cassette and Lock Ring are not included.
Hollow shaft stainless steel optional stainless steel lock ring.
These have a lock ring to fix the settings of the lens.
Cyclus Tools- Miche remover of sprocket bearer and lock ring.
Bags with heads 10* 37 and lock ring stainless steel- Vereijken Products.
With flush-mounted cover, round or square cover or lock ring.
Remove lock ring and lift out the pulley with spring and cord fig. 13.
Keep the base on your skin, and then turn the lock ring to the unlock position.
Remove the lock ring from the spindle and remove the sprocket and clamp washers.
Restraint joint for pipes in BAIO push-fit sockets, consisting of lock ring and grip ring. .
This lock ring fix the clincher ring LDM-part.no.:7084 at the bushing.
Shipping time: 2- 5 workdays Cyclus Tools-Miche remover of sprocket bearer and lock ring.
Lock ring of the polygon, formed after the Insert installation screw screw lock wire.
Cyrillic on the outside, but the lock ring is Pakistani, and the firing pin is newer, probably Iranian.
Toughened safety glass(ESG)-withstands loads of up to 5000 kg, lock ring up to 650 kg.
Steel welding fitting with lock ring for installation in/at BAIO sockets, test regulation: EN 545.
Or equivalentRestraint joint for pipes in BAIO push-fit sockets, consisting of lock ring and grip ring. .
Rotate the lock ring in the direction opposite to that shown by the“ LOCK” arrow until it stops.
PE electrofusion fitting with integral support liner and lock ring for installation in/at BAIO sockets, test regulation: DVGW GW 337.
Turn the lock ring clockwise(when viewed from the rear) until the headshell is locked tightly into the tone arm.
The Ebikemotion X35 motorgets its input from 20 magnets in the cassette lock ring which are read by a sensor in the dropout.
The steel fusion end with lock ring serves as transition adaptor from BAIO® sockets to steel pipes using welding technology.
Because of the larger construction height of the aluminum core in the two-piece brake discs, the lock ring cannot be mounted with the required screw-in depth.
Names of parts(Fig. p. 3)1 Light-emitting area 2 Auto light receptor 3 Lock ring 4 Lock pin 5 TEST button/CHARGE lamp 6 AUTO CHECK lamp 7 MODE button 8 ON/OFF button 9 Flash control mode lamp.