Examples of using Specified accuracy in English and their translations into German
{-}
-
Colloquial
-
Official
-
Ecclesiastic
-
Medicine
-
Financial
-
Ecclesiastic
-
Political
-
Computer
-
Programming
-
Official/political
-
Political
Maximum input for specified accuracy 10x range 1000 V max.
Specified accuracy is for ACA clamp measurement at the center of jaws.
Temperature Coefficient: 0.1 x(specified accuracy) per to 18, 28 to 50.
Specified accuracy@ ACA fundamental> 2A; ACV fundamental> 50V.
Temperature Coefficient: nominal 0.15 x(specified accuracy)/oC@(0oC~ 18oC or 28oC~ 40oC), or.
Specified accuracy is from 1% rdg to 100% rdg of range and for measurements made at.
Anton Paar guarantees the specified accuracy and repeatability values.
Specified accuracy applies after 30 minutes when the unit changes to a different environment ambient.
Temperature Coefficient: Nominal 0.2 x(specified accuracy) per C below 18 C or above 28 C.
Specified accuracy applies after 30 minutes when the Tester adjusts to different environmental temperatures.
If the distance is greater than specified accuracy, you will need to calibrate the X axis.
Specified accuracy±% of the reading+ display errors in counts number of least significant digits.
CREST-MAX Capture Mode Accuracy: Specified accuracy plus 250 digits for changes> 5ms in duration.
Specified accuracy is for ACA clamp measurement at the center of jaws. when the conductor is not positioned at the jaw center, position errors introduced are.
If the material was poor hardening,and it is bad form and met the specified accuracy, it is better from its purchase just give up.
Add 1% rdg to specified accuracy@ ACA fundamental< 5A or ACV fundamental< 90V.
Description: PIPETMAN® M electronicpipettes have been designed to offer specified accuracy and precision in both standard and repetitive pipetting modes.
Add+ 4% rdg to specified accuracy for measurements made BeYonD jaw marking lines toward jaws opening.
Open Circuit Voltage: 0.4 V dc typical 1AutoTect is for 6.000 kΩ~ 6.000 MΩ ranges;2Add 40 d to specified accuracy when reading is below 20% of range.
Add+ 1% rdg to specified accuracy for measurements made wiThin jaw marking lines away from jaw opening.
Lt; 100μs Open Circuit Voltage: 0.4VDC typical Audible Threshold:between 10Ω and 300Ω 1Add 40d to specified accuracy while reading is below 20% of range Frequency Voltage Range.
The sensors are supplied with a calibration adjuster(tripod), which makes it possible to level the respective sensors when measuring in buildings,required to achieve the specified accuracy.
The specified accuracies are obtained at an atmospheric pressure of 1013 hPa, an ambient temperature of 23 C and an air humidity of 65%rF.
Specified absolute accuracy of the sensor chip used for Calitemp.