Examples of using Allowable deviation in English and their translations into Greek
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Financial
-
Official/political
-
Computer
Allowable deviation of width.
B” teeth types allowable deviation A.
Allowable deviation of thickness.
Project“A” teeth types allowable deviation.
Length allowable deviation is+ 20mm;?
(304 stainless steel tube size and allowable deviation).
Allowable deviation of length Thickness.
Ming titanium chemical composition allowable deviation with GB/T3620.2 provisions.
Allowable deviation of outer diameter.
The size of the internal screw tubes and the allowable deviation of the thread parameters.
Allowable deviation of outer diameter of titanium pipe(mm).
Inspection by the buyer,the Kun Ming titanium chemical composition allowable deviation with GB/T3620.2.
The allowable deviation of the outer diameter of the pipe shall be in accordance with the table.
(3) Refer to GB222-84"Sample sampling method for chemical analysis of steel and allowable deviation of chemical composition of finished products".
The allowable deviation of chemical composition and composition of 3: GB/T3620.2 titanium and titanium.
We paid particular attention to design,material selection, and manufacturing precision, as the allowable deviations must be practically nil in order to allow the various subsystems to work together smoothly.
The pipe, the allowable deviation of the length of the length of the tube is +10mm, the length of the length of.
In the same transmission assembly, the end face of the two sprockets should be located in the same plane,the sprocket center is 0.5 meters below the allowable deviation of 1 mm, the sprocket center is more than 0.5 meters, allowing the deviation of 2 mm.
The allowable deviation of the wall thickness of the tube shall not exceed 12.5% of the nominal wall.