Examples of using Reference speed in English and their translations into Greek
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Financial
-
Official/political
-
Computer
Reference speed 0 r/min.
D D T dyc_Cr stc_Cor Reference speed Limiting speed. .
Reference speed 0 r/min.
Is the frequency at the reference speed of 5 km/h or the lowest reported speed; .
Reference speed 8000 r/min.
All default, and many payware planes have a lot of documentation,like check lists, reference speed and so on.
The reference speed is 5600 and the limit speed is 4500.
The reference engine speed, nref_k, shall be calculated using the gear ratio of gear k at the reference speed of vref= 61 km/h.
The central idea of the theory was that if, for all reference speed of light is constant and if all natural laws are the same, then both the time and the movement depends on the reference system in which they are measured.
The measured pass-by noise value LpAeq, Tp(vtest)at 80 km/h shall be normalised to the reference speed of 80 km/h LpAeq, Tp(80 km/h) using formula(1).
The central idea of the theory was that if, for all reference speed of light is constant and if all natural laws are the same, then both the time and the movement depends on the reference system in which they are measured.
The measured pass-by noise value LpAeq, Tp(vtest)at 80 km/h shall be normalised to the reference speed of 80 km/h LpAeq, Tp(80 km/h) using formula(1).
Data Shift To minimise the biasing effect of the time lag between the feedback and reference cycle values, the entire engine speed and torque feedback signal sequence may be advanced ordelayed in time with respect to the reference speed and torque sequence.
Determination of the negative torque required to motor the engine at idle and reference speeds and linear interpolation between these two points.
N series Deep Groove Ball Bearing has varies size parameters, such as weight, inner&outer diameter,basic dynamic&static load rating, reference speed and limit speed, etc.
At least four measurements shall be made on each side of the test vehicle at test speeds lower than the reference speed specified in paragraph 4.1. and at least four measurements at test speeds higher than the reference speed.
Bearing 16026 has a variety of size parameters, such as weight, diameter, thickness or height, static anddynamic load rating, the reference speed and limiting speed and so on.
The measured pass-by noise value at maximum speed LpAeq, Tp(vtest)shall be normalised to the reference speed of 250 km/h LpAeq, Tp(250 km/h) using formula(2).
Single frequency component at reference vehicle speed.
Speed index Reference to baseline value should be± 10%.
The reference wind speed(10 meters high, 120 years return period) considered was of 32 m/sec.
Laser cutting thickness and speed for reference( based on the laser power 800W).
At deck level(57 meter above sea level) the reference wind speed(average 10') is 50 m/sec.
And this year too,what will be the reference for speed and power for the coming months has been taken off!
The reference wind speed(hourly average, 10 meters high, 120 years return period) was estimated, from a large database of wind measurements, to be 30 m/sec.
The new design offers the same deadweight and service speed as the reference WOZMAX® vessel while meeting EEDI phase 3 requirements.
The basic findings from the morning sessions have indicated the types of challenges that might lie ahead for candidate and potential EU membership candidate countries, with reference to the speed of real economic convergence.