Examples of using Crosssection in English and their translations into Italian
{-}
-
Colloquial
-
Official
-
Medicine
-
Financial
-
Ecclesiastic
-
Ecclesiastic
-
Computer
-
Programming
-
Official/political
Crosssection of ribs.
Semifinished crosssection.
Crosssection χ250.
Submicron BiCMOS: crosssection of transistors 7.
Crosssection(a) and longitudinal section(b) xl50.
This is the path along which the crossSection is extruded.
A, Total crosssection of the secondary winding.
Diameter of parallel portion of a test piece with circular crosssection.
Crosssection of the building with KEYLOAD-BEARING SYSTEM.
N, 2n reaction effective crosssection for reactor neutrons, in barns.
alloys lies in their much lower neutron crosssection.
Assume the beam length equal to 0.5 m, and the crosssection dimensions b= 0.05 m, h= 0.02 m.
Bars and rods of round crosssection, oF unalloyed copper, coiled Wire of round crosssection, oF unalloyed copper ex 83.01.
Broken wires give rise to sudden reductions of crosssection area in the rope.
Diecast aluminium triangular crosssection legs, available in different finishes,
approximately to an average velocity in the free face crosssection of 2 to 3 m/s.
In zones 0 and I the loss of crosssection of individual wires reached 7·5%,
Although this sample piece presented a minimum of corrosion attack, the loss of crosssection area resulting from external wear is about 4.
The crosssection resembles the letter T. The corners are rounded,
Example of the designation of a wire rod of round crosssection, with a diameter of 16 mm, in 3 CD 55 steel.
corresponds to the beam crosssection through the fluorescent screen.
A straight beam of the length l, width and height of the crosssection- b and h respectively,
according to the position and crosssection of the broken wire.
The VDEh project(8) aims to calculate the temperature distribution in the crosssection of the rolled product during passes through individual stands and in the cooling zones.
height as given in 52.1.1 but with special features of crosssection and dimensions.
When a significant axial load acts on the crosssection, full depth cracks can not develop, and there is always a compressed part of the crosssection through which shear could be transferred more easily.
Frame are very varied in shape and crosssection, depending on the tasks they have to perform.
Products with closed crosssection which are produced by forming welded or seamless rubes,
levels of reduction of crosssection less than 2r% may be included.
be anticipated that in a roadway drivage of 20m crosssection the dust-bearing air at the heading face will
