Examples of using Parallel to the axis in English and their translations into Italian
{-}
-
Colloquial
-
Official
-
Medicine
-
Financial
-
Ecclesiastic
-
Ecclesiastic
-
Computer
-
Programming
-
Official/political
With sagittal motion, cutting direction parallel to the axis.
Measurements parallel to the axis, orthogonally to the workpiece.
Measures of width are expressed by segments parallel to the axis of coiling;
All surfaces parallel to the axis of the part can be measured, such as crank pins,
Its teeth are fitted radially or are aligned parallel to the axis of rotation.
WIRING: the section is parallel to the axis and to the dust and controlled.
Literal definition: Full vertical cylinder rotating about an axis parallel to the axis of the cylinder itself.
Is the normal stress parallel to the axis of the weld.
whose longer side is parallel to the axis of the river.
Axial Longitudinal, or parallel to the axis or centerline of a part.
is the measurable irregularity or wobble parallel to the axis of rotation.
bending the gnomon so that it is parallel to the axis of rotation of the earth,
other longitudinal elements run parallel to the axis of the piece.
Only by"Pulling" the handwheel parallel to the axis can the shaft operate.
rivet it can support tension loads(loads parallel to the axis of the shaft);
Such flow pressure is exercised by some rollers which turn parallel to the axis, supported by a roller holder.
three perpendicular planes parallel to the axis.
Such flow pressure is exercised by rollers which turn parallel to the axis, and which are supported by a roller holder.
and its lines of force are parallel to the axis of symmetry.
incident light with reflecting substage mirror for the projection, parallel to the axis, of the light;
round a line parallel to the axis of the ecliptic.
object we shall take for convenience ray A parallel to the axis, which is deflected by the lens
ends at the top in the form of a flute mouthpiece flattened parallel to the axis of rotation, which is supported by a rectangular brass
of the system of coordinates of the measuring points shall be parallel to the axis of the drum of the lifting mechanism.