Examples of using Each sensor in English and their translations into Korean
{-}
-
Colloquial
-
Ecclesiastic
-
Ecclesiastic
-
Programming
-
Computer
For each sensor.
Acquiring the information of each sensor.
Each sensor is usually….
The driver/firmware of each sensor is provided.
But each sensor is different.
Calibration certificate delivered with each sensor.
Each sensor with an unique ID code 4.
Separate calibration of each sensor is not required.
Each sensor has at least one channel.
All these errors depend on various physical phenomena specific to each sensor technology.
Each sensor may be configured as a low power receiver STA 106e.
Typically, the data is of a discrete nature, and each sensor value can be treated as an event.
Each sensor periodically transmits a sensor value to the mobile hub.
In addition to its“3D multi-touch” capabilities, QuNeo has multi-colored LEDs under each sensor that express visual feedback.
By default, each sensor is named Sensor 1, Sensor 2, and so on.
In the case of HBM optical strain sensors, the k-factor is identified on the data- and calibration sheets that are individually delivered with each sensor.
Each sensor detects the electromagnetic signal emitted by the lightning return stroke.
Combined with vehicle detection software that can read car each sensor date, real-time detection auto state, providing real-time valid reference data for traffic safety.
Each sensor(device) sends its parameter sets automatically to the IO-Link master.
By analyzing key data such as temperature, pressure, calorie, and flow rate collected through each sensor, we present the criteria for optimizing operational efficiency to our customers.
Each sensor is calibrated for both temperature and humidity by Fluke Calibration.
The addition of more and more sensors on the same fiber results in only minor loss and no crosstalk, as long as enough spectral band of the spectrum of light is reserved for each sensor(fig. 6).
Each sensor captures pressure signals as humans interact with objects in various ways.
After tests of the pressure sensors in various positions, the definitive pattern was defined with the six pressure sensors placed on the same vertical, with a distance between each sensor of 25 mm.
Each sensor 16 is configured for detecting a force exerted by a user's foot on the sensor 16.
These measurements were not very accurate because the relationship between process pressure or temperature and density are not always precisely known--each sensor adds its own separate error to the overall measurement error, and the speed of response of such calculations is usually not sufficient to detect step changes in flow.
However, each sensor that is added increases the maximum switch-off time that can be achieved in a worst case scenario.
The determination of suitable drive currents(and resistors) for a particular selection of LEDs canbe made once using a calibration sensor, and subsequent sensors built using the same combination of LEDs can include the set of pre-determined resistors; separate calibration of each sensor is not required.
This system can detect each sensor location automatically after vehicle done the tire rotation/exchange and running on the road….
Each sensor element in the CCD 8103 can have a different inherent noise level, and a different light conversion efficiency.