Examples of using Quick test in English and their translations into Korean
{-}
-
Colloquial
-
Ecclesiastic
-
Ecclesiastic
-
Programming
-
Computer
Quick test” mode.
Want to try a quick test?
Quick test setup of multiple scan lists.
I have just done a really quick test.
Quick Test function to test most vehicle systems.
At the beginning of each chapter there is a quick test.
A quick test showing elevated protein levels indicated the possibility of a tumor.
Function Express Test Performs a quick test of devices.
Quick Test Lab Analyzer Equipment Intelligent Urine Flow Meter Error≤ 1.5 ML/ S.
Function Express Test Performs a quick test of system devices.
If the Quick Test does not find a problem, run the Extensive Test(two hours or more).
Then according to the need,select“Standard test” or“Quick test” mode.
This is a simple and quick test and may show changes such as abnormal shadowing.
Meter and Sequence Modes- The Meter mode is used for a quick test or troubleshooting.
While in Quick Test mode, a complete set of data is acquired in as little as two seconds per wavelength.
It's very smart to give all links a quick test before you send the email to others.
Turn on the Analyzer power. Then according to the need,select“standard test” or“Quick test” mode.
The quick test at regions of interest allows the companies to check quality specifications at critical locations.
It's most important feature however is the small atomic radius that allows quick tests and detecting even the smallest leaks.
A quick test is to run an Exchange Online cmdlet, for example, Get-Mailbox, and see the results.
Nowadays, VBScript is the primary scripting language for Quick Test Professional(QTP), which is a test automation tool.
A quick test with my multimeter showed that there was something wrong with Q10 and Q11 because one BJT was always"ON" while the other was always"OFF".
If the memory passes the Quick Test but there is still a problem with the computer memory, run the Extensive Test. .
Quick Test” mode: After 15 minutes of adding sample, Insert the test cassette into the Analyzer, click“QUICK TEST”, fill the test information and click"NEW TEST" immediately.
These tests can vary from simple quick tests to exhaustive read and write tests to verify the integrity of the drive.
Quick Test” mode: After 15 minutes of adding sample, Insert the test cassette into the Analyzer, click“QUICK TEST”, fill the test information and click"NEW TEST" immediately.
Quick test” mode: Insert the test cassette into the Analyzer at 15 minutes after sample application click“QUICK TEST”, fill the test information and click"NEW TEST" immediately.
Quick test” mode: Insert the test cassette into the Analyzer at 15 minutes after sample application and click"New test", the Analyzer will automatically give the test result after a few seconds.
Quick test” mode: After 10 minutes of adding sample, Insert the test cassette into the Analyzer and click"New test" immediately, The Analyzer will automatically give the test result after a few seconds.