PRE-HEATING Meaning in Malay - translations and usage examples

• pra-pemanasan
• pra pemanasan

Examples of using Pre-heating in English and their translations into Malay

Generally no pre-heating required.
Secara umumnya tiada pra-pemanasan diperlukan.

It is ultra-flat which does not damage print-heads. After pre-heating;
Ia adalah ultra-rata yang tidak merosakkan cetak kepala. Selepas pra-pemanasan;

Without pre-heating, and continuous operation is possible.
Tanpa pra-pemanasan, dan operasi berterusan mungkin.

Ready to be used immediately. No pre-heating required.
Boleh terus digunakan. Tidak perlu dipanaskan dahulu.

Pre-heating and slow cool-down is sometimes required, according to the metal's type, shape.
Pemanasan pra dan kelembapan sejuk kadang-kadang diperlukan, mengikut jenis logam, bentuk.

The hooves can be easily removed by pre-heating them with a torch flame.
Kuku boleh dengan mudah dihapuskan oleh pra-pemanasan mereka dengan api obor.

Setting feeding times, pre-heating time, and welding time according to different pads and parts, achieve complex soldering with a variety of soldering points.
Mengetuk masa pemakanan, masa pra pemanasan, dan masa kimpalan mengikut pad dan bahagian yang berbeza, mencapai pematerian yang kompleks dengan pelbagai titik pematerian.

Drynk's heat performance can be optimized by pre-heating it before use.
Prestasi haba Drynk boleh dioptimumkan dengan pra-pemanasan sebelum digunakan.

Controlled by the PLC system, with pre-heating functions, intelligent PID control output, the difference of setting temperature and actual temperature controlled in +-1℃, it is economic and efficiency.
Bijak PID kawalan output, dengan The Preheating fungsi, The perbezaan dalam persekitaran suhu dan sebenar kawalan suhu dalam+- 1, itu ekonomi dan kecekapan.

Surface treatment: Polishing, shotblasting, pre-heating, annealing etc.
Rawatan permukaan: Polishing, shotblasting, pre-heating, annealing dan lain-lain.

Controlled by the PLC system, with pre-heating functions, intelligent PID control output, the difference of setting temperature and actual temperature controlled in +-1℃, it is economic and efficiency.
Dikawal oleh sistem PLC, dengan pra Pemanasan fungsi, output kawalan PID pintar, perbezaan suhu dan kawalan dalam+- 1, suhu sebenar adalah ekonomi dan kecekapan.

Surface treatment Polishing, shotblasting, pre-heating, annealing etc.
Rawatan permukaan Menggilap, tembakan pukulan, pra-pemanasan, penyepuhlindapan dan lain-lain.

Onloading-> Electrostatic Dedusting-> pre-heating-> base coat spray-> flash off-> UV curing-> Vacuum metalizing-> UV top coat spray-> IR oven-> UV curing-> Cooling-> Unloading-> QC checking-> Packing.
Onloading-> elektrostatik dedusting-> pra-pemanasan-> semburan asas kot-> flash off-> pengawetan UV-> Vacuum Metalizing-> UV bahagian kot semburan-> ketuhar IR-> UV pengawetan-> Cooling-> Pembongkaran-> QC check-> Pembungkusan.

Electrically wrap angles adjusting ensures paper pre-heating area within 60－270°.
Electrically wrap angle adjusting memastikan area pra-pemanasan kertas dalam 60270 °.

The machine consist of automatically feed material and coat prima, fluorescent light detection, pre-heating profile, double film feeding rollers, automatically joint film with the two rollers, automatically correct error and glue and coat protective film.
Mesin ini terdiri daripada secara automatik memberi makan bahan dan kot prima, pengesanan lampu neon, profil pra-pemanasan, double penggelek makan filem, secara automatik filem bersama dengan dua penggelek, kesilapan secara automatik betul dan gam dan kot filem pelindung.

During the warmer seasons, the system pre-cools and dehumidifies while humidifying and pre-heating in the cooler seasons.
Semasa musim panas, sistem pra-menyejuk dan dehumidifies manakala humidifying dan pra-pemanasan di musim sejuk.

Controlled by intelligent PLC, with many functions, like pre-heating, curing time stting, up and down temperature setting, etc.
Dikawal oleh PLC yang pintar, dengan pelbagai fungsi, seperti Pemanas pra, pengawetan stting masa dan suhu persekitaran, dan sebagainya.

Conventional UV mercury lamp needs several minutes for pre-heating, but LED doesn't need.
Lampu konvensional UV merkuri memerlukan beberapa minit untuk pra-pemanasan, tetapi LED tidak perlu.

Multicolor Silicone Swimming Cap hot briquetting Machine Rubber vulcanization process requires pre-heating, automatic discharge gas, pressure curing, timing alarm, automatic mold opening and product release, etc.
Berminat berenang silikon berenang panas Mesin briquetting panas Proses pemvulkanan getah memerlukan pra pemanasan, gas pelepasan automatik, pengawetan tekanan, penggera masa, pembukaan acuan automatik dan pelepasan produk, dan lain-lain.

Pre-heat to 392 to 572°F(200-300°C).
Pra-haba kepada 392 kepada 572 ° Pra-haba kepada 392 kepada 572 ° F( 200- 300 ° C).

The pre-heated mold allows the metal to flow easily through thin, detailed sections.
Acuan pra-panas membolehkan logam mengalir dengan mudah melalui bahagian-bahagian yang nipis dan terperinci.

Pre-heat oven to 180degC.
Panaskan oven kepada 180degC.

Pre-heat the oven to 180°C(360°F).
Panaskan oven sehingga 180 C( 360 F).

Pre-heat the oven to 350… grease and flour a"9 x 13" inch cake pan and then pour the batter into the pan.
Panaskan ketuhar pada suhu 350 darjah tabur tepung dan sapu minyak pada pan kek kemudian letak adunan.

Air is pre-cooled or pre-heated beyond the set point, allowing quicker recovery of the desired condition transter.
Udara disejukkan sebelum atau dipanaskan di luar titik set, membolehkan pemulihan keadaan transparan yang lebih pantas.

The materials will be pre-heated during the conveying process and the low melting point plastic like PVC will be pyrolyst.
Bahan-bahan yang akan pra-dipanaskan semasa proses menyampaikan dan titik plastik lebur yang rendah seperti PVC akan pyrolyst.

Turn on the machine in the network, press the"On/ Off" switch and wait for the"OK" indicator to light up. Place pre-heated dishes.
Hidupkan mesin dalam rangkaian, tekan suis" Hidupkan/ Tidak" dan tunggu penunjuk" OK" untuk menyala. Letakkan hidangan pra-dipanaskan.

The decision to use DUROSTONE CFR767 over one of the standard grades is made when the solder bath temperature exceeds 265°C and the bottom side PCB pre-heat exceeds 140°C.
Keputusan untuk menggunakan Durostone CFR767 lebih satu daripada gred standard dibuat apabila suhu mandi pateri melebihi 265 C dan bahagian bawah sebelah PCB memanaskan lebih dulu melebihi 140 C.

Before pressing, some parts of the oil extraction press such as the press chamber, press screw and press ring will be pre-heated.
Sebelum menekan, beberapa bahagian akhbar seperti ruang akhbar, skru tekan dan cincin akhbar akan dipanaskan terlebih dahulu.

Before pressing, some parts of the press such as the press chamber, press screw and press ring will be pre-heated.
Sebelum menekan, beberapa bahagian akhbar seperti ruang akhbar, skru tekan dan cincin akhbar akan dipanaskan terlebih dahulu.