Examples of using Windings in English and their translations into Malay
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
My motor coil has three windings.
And have multiple output windings, the load which must be distributed.
How to Test Generator Windings.
HZ Industrial Generator's windings are specially treated with VPI system.
It will cause some serious hidden dangers even burn windings.
Watt and four output windings(terminal pairs).
Iron legs and cross piece into two parts, legs sheathed with windings;
After the failure, the rotor windings are short-circuited.
Motor stator windings with water-resistant magnet wire, a good water resistance, the rotor cage structure.
Certain transformers have the windings protected by epoxy resin.
Some power transformers are immersed in transformer oil that both cools andinsulates the windings.
Determination of capacitances windings-to-earth and between windings.
Models of an ideal transformertypically assume a core of negligible reluctance with two windings of zero resistance.
Both of the high and low voltage windings are encased in resin, so it prevent the windings from dust and corrosive air.
It is a commutated series-wound motor where the stator's field coils are connected in series with the rotor windings through a commutator.
Water-filled motor stator windings and core directly immersed in water, cooling effect, the output power, high efficiency.
Various parameters can be adjusted through the stator windings and can be operated at wide voltage.
For bigger alternators, windings are impregnated with high quality material and using the latest Vacuum Pressure Impregnation(VPI).
The output directcurrent is directly connected to the rotor windings to generate the rotor magnetic field.
All the windings is with Class H insulation and using the lastest Vacuum Pressure Impregnation system(VPI) to ensure good insulation effect.
The pump sealed oil chamber is equipped with high-precision anti-jamming leakage detection sensors,stator windings embedded in the thermal components, automatic protection of the pump motor.
During operation, the magnet windings must be cooled below their critical temperature, the temperature at which the winding material changes from the normal resistive state and becomes a superconductor.
The pump sealed oil chamber is equipped with high-precision anti-jamming leakage detection sensors,stator windings embedded in the thermal components, automatic protection of the pump motor.
By using high-performance magnets and high-density windings, Honda is able to increase the power output of the electric motor by 50% to 20 hp(15 kW) at 2,000 rpm when compared with the first generation.
Fault Analysis: Generator rotor winding insulation damage, coil deformity and severe dust and greasy attached in the ends seriously are all leading to the grounding of the generator rotor windings.
The interphase short circuit: the generator windings ends will be greatly impacted by electric power and may make the coil end deformed under two-phase or three-phase short circuit and differential protection tripping happening.
In some smaller applications, a fan blade attached to the shaft often acts as an artificial load to limit the motor speed to a safe value, aswell as a means to circulate cooling airflow over the armature and field windings.
Winding a rims of 1.5 meters in diameter with atin-Niobium strip of up to 20 kilometers long, the windings produce a strong and stable magnetic field sufficient to lift a weight of 122 kilograms and to make it Floating in the magnetic field space.
The direction of the magnetic field through a coil of wire can be found from a form of the right-hand rule.[14][15] If the fingers of the right hand are curled around the coil in the direction of current flow(conventional current,flow of positive charge) through the windings, the thumb points in the direction of the field inside the coil.
EvoTec 50HZ BrushlessIndustrial Generator for land use standardised all windings be added with an extra marine varnish to ensure long operational life-span even operating on the harshest and toughest working environments especially near to the sea which is extremely humid and salty.