Examples of using Plenum box in English and their translations into Norwegian
{-}
-
Colloquial
-
Ecclesiastic
-
Ecclesiastic
-
Computer
Documented with BVK plenum box.
AA: Asymmetric plenum box and clamp fixing.
V: Vertical duct connection, with plenum box.
Plenum box for horizontal duct connection.
H: Horizontal duct connection, with plenum box.
Plenum box adapted both spiro and flexible ducts.
The diffuser face is fixed to the plenum box with a screw.
Plenum box for horizontal or vertical duct connection.
D: Removable diffuser face,only in variant with plenum box.
The plenum box can be connected from the side or the back.
Symmetric and asymmetric plenum boxes, with or without lining.
The diffuser must be installed together with a MBB-S type plenum box.
The Luna plenum box features a damper and measuring outlet for commissioning.
G20 is supplied as standard with springs for installation in plenum boxes, type VBA.
The Luna plenum box features a damper and measurement device for adjustment.
D: Removable diffuser face,only in variant with plenum box Parts and characteristics.
The plenum box has wire operated damper, and measuring outlet for commissioning.
Suitable for restricted ceiling voids due to the low overall height of the plenum box.
The plenum box can be provided with one outlet, and one, two or three inlets for AuraFlex duct.
C20/C21 can be used for supply air andcome as standard with springs for installation in plenum boxes type VBA and WB.
The plenum box is also provided for spiro-assembly, but then only with one inlet and one outlet.
C20/C21 are supplied as standard with springs for installation in plenum boxes type VBA, WB or mounting frame type GGR.
The plenum boxes are equipped with a damper and measuring device, enabling individual adjustment.
Ready-to-install component which consists of the diffuser face, blades,duct collar or plenum box with side entry or top entry spigot, and suspension holes.
AFK plenum box is recommended to provide better sound attenuation, and adjustment and measurement unit.
Ready-to-install component which consists of the diffuser face with four equal blade arrays,a cross bar for fixing the actuator, a plenum box with side entry or top entry spigot, and suspension holes.
Plenum box damper is cleanable, so any purification using as a extract diffuser can be performed easily.
Plenum box with side entry or top entry spigot, and variant with electric actuator and inspection access.
A BVK plenum box is recommended because it provides better sound attenuation and control and measuring options.
WB is a plenum box for supply air intended to achieve a stable flow to rectangular front plates or grilles.