Examples of using Second sheet in English and their translations into Norwegian
{-}
-
Colloquial
-
Ecclesiastic
-
Ecclesiastic
-
Computer
The second sheet of plywood is sewn on top.
You will be left only to cut a second sheet holding cardboard halves.
The second sheet is mounted in a similar manner.
According to the obtained size is cut a second sheet of particle board(of course, if it is necessary).
The second sheet is placed next to the previous one.
Fasten a layer of mineral wool or polystyrene on top,dress it with glassine, and cover it with a second sheet of plywood.
On the second sheet do the same workpiece.
First sheet of the second row is cut along the bottom right corner of the dock and a second sheet of the first series with a small gap as shown in the diagram.
Take the second sheet called for in the primary target.
Smaller width Sheet(opens second) welds so that the edges of the frame to remain 1 centimeter, while the second sheet on the contrary, will extend beyond the frame structure at the 2- 4 centimeters.
The second sheet is placed on the first lap or placed underneath it.
The second: Do the same with the second sheet, stykuya it with the first side to see 60.
The second sheet is attached in the same way the third, then they are aligned to the eaves.
After that, a rectangle of a suitable size is cut from the second sheet of cardboard and folded in half so that the card is obtained.
The second sheet is laid on the first one wave overlapping and fastened in a similar manner.
The telemarketing script will be transferred on to a second sheet known as a call map for easy call navigation and training.
Second sheet laid with overlap into a single wave, and again fastened to the sheathing screws;
The telemarketing script testamentum ero transferred on ad second sheet known sicuti vocamus map loco facilis vocamus navigation adque training.
The second sheet had to be thin, so that the ink could be seen through it when the copy was held up to the light, thus reproducing the original exactly.
The advanced bilingual telemarketing script will be transferred on to a second sheet known as a call map for easy call navigation, flow and enhanced training.
Repeat with the second sheet of dough so you now have 12 rectangles.
The advanced bilingual telemarketing script will be transferred on to a second sheet known as a call map for easy call navigation, flow and enhanced training.
The first and second sheets are joined and sealed into the lock using mallets.
Then go on to do the second fixing,overlap the second sheet laterally onto the first and fix with self screws on the first lowest tile which corresponds to the overlap.
They also can be used, having replaced on the necessary place as soon as at them the second real sheet is formed.
Plus, with the optional 520 sheet second cassette you can increase your total paper input capacity to 820 sheets.