Examples of using Test button in English and their translations into Norwegian
{-}
-
Colloquial
-
Ecclesiastic
-
Ecclesiastic
-
Computer
Embedded test button and troubleshooting.
Built-in operation indicators Lockable test button.
Test button is pushed, the probable cause.
To check the configuration you can click on the Test button.
Then click Test button to see if your design works.
To test your sensitivity setting,click on the Test button.
The test button does not always appear during install.
Your sensitivity setting will be applied after you press the Test button.
Nu have no test button, although the amount can be GPU Fans modificata.
I GeForce 9400gt and does not appear in the control panel Test button overclocking.
Test button with LEDs for all 5 fuses and a polarity warning LED.
Wall and floor mounting| Test button for functional test on the front.
Er set carbon monoxide detector with display and temperature display, test button, RM370.
Pressing the test button(next to the battery) will activate a beep.
G7L is equipped with a double-break mechanism and a test button(excluding-P models).
Equipped with test button for manually starting the short function test. .
You can perform a network test by holding the test button for at least 6.5 seconds.
TEST button and LEDs indicating both presence of power supply and signaling failures.
With LED function indicator, test button, deep discharge protection and electronic switching.
TEST button and LEDs indicating both presence of power supply and signaling failures.
If the output voltage is not decreased by pressing the test button, the power should be turned off.
Press the gas gun test button(see picture) to see if there is any sound of air intake or ignition.
Smartwares carbon monoxide detector with display and temperature display, test button, RM370, 2 piece.
Press the test button, issued a product in the range of human hearing the voic e within, suggesting that the products normal operation.
The person using the house/apartment is responsible for testing the smoke detector(by pressing the test button) and changing batteries.
Four-light LED battery status indicator- Simply press the test button and the integrated status indicator will tell you how much power is left.
When pressing the test button the LED battery capacity indicator shows you how much power is remaining, and when it's time to recharge.