Examples of using The stator in English and their translations into Polish
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Ecclesiastic
-
Financial
-
Official/political
-
Programming
-
Computer
The stator is good.
Cool running, since losses are concentrated in the stator.
The stator is also interchangeable.
V type has four variants with different openings in the stator.
The stator was originally built in two halves.
Prepare a measurement record form for the stator and rotor circuits.
The stator has more blades than the rotor.
However, some rotors carry permanent magnets, and the stator holds the conductors.
The stator voltage, current and power are also exhausted.
The stator core is unique laminated core design without a seat,
A high efficiency motor will usually have 20% more copper in the stator winding than its standard counterpart.
Clean air flows through the stator winding and dissipates the heat where the highest temperatures occur.
Control of the generators voltage takes place through an additional magnetic field a compoundtransformer is installed in the stator.
where design improvements for the stator and coils were engineered and manufactured.
The stator and rotor laminations are specially designed for low-voltage applications used in different electric vehicles.
possible contamination on the stator windings.
Built-in thermal switches in the stator windings(140ÂoC/ 284ÂoF,±5), connected to built-in contactor,
respectively form forward and reverse rotating magnetic fields in the stator of the rotating motor,
Measure the insulation temperature drop of the stator winding, study the change of the insulation temperature drop,
keeping the magnetic poles of the rotor from ever fully aligning with the magnetic poles of the stator field, so that the rotor never stops(like a compass needle does),
In the stator circuit, it is necessary to connect three AC voltages
Article from Wikipedia on this electric motor formed from the ultrasonic vibration of a component, the stator, placed against another, the rotor
with thermal sensors in the stator in order to switch the pump off in the event of overheating
Refiner Pulp passes through by the tube of the grinding shell body and the stator into the heart of the two grinding area,
adjusted for the manual, through the worm gear transmission inspires wire mother rotates, the stator feed screw driven plate make the corresponding axial movement,