Examples of using Ping command in English and their translations into Portuguese
{-}
-
Colloquial
-
Official
-
Medicine
-
Financial
-
Ecclesiastic
-
Ecclesiastic
-
Computer
-
Official/political
How to use the ping command?
To use ping command, you need first do below step.
To test the connection,use the ping command.
Cancel the ping command with Ctrl- C.
Then below is different situation to use ping command.
Solution: Use the ping command to test connectivity.
Please verify the reachability to the router LAN using the ping command.
Issue a ping command to them to verify they are on the network.
Starts a terminal window with the ping command to a remote computer.
The ping command is the standard tool for testing whether a TCP/IP connection works.
The client computers can successfully contact the server by using the ping command.
DVR menu with ping command, convenient to do DVR network testing.
There are many tools for website speed test,the commonly used one should be Ping command.
Solution: Use the ping command to test connectivity to each of the hosts.
Here MVTEAM are glad to share a useful tool to check the network problem---Ping command.
The ping command helps to determine if a device on a network is responding by IP address.
For example, at the source server,use the ping command to test IP connectivity with the destination server.
If the ping command fails, verify that the default gateway IP address is correct and that the gateway(router) is operational.
You can perform theseadditional network diagnostic tests, such as using the ping command, independently from the wizard.
For example, we will take a ping command that sends several TCP/ IP packets to the specified address.
For this card if you stay on stand-by for a few hours she auto-desconecta andloses network(the ping command no longer works), but he's still connected?
Using the ping command, contact each DNS server by its IP address from its remote counterpart.
If the client hardware appears to be prepared and functioning properly,verify that it can contact other computers on the same network by using the ping command.
Note: The ping command confirms that a device with the specified IP address is responding, not that the intended device is responding.
To verify whether a client has basic TCP/IP access to the DNS server,first try contacting the preferred DNS server by its IP address by using the ping command.
If the ping command fails, verify that the DNS server is IP address, and that all the gateways(routers) between this computer and the DNS server are operational.
To verify that this is indeed the problem,Microsoft recommends that you issue the following ping command to the client that is failing from the Web server.
It allows testing network connectivity with the ping command which sends an ICMP echo request message, which the recipient is meant to answer with an ICMP echo reply message.
If you are using a network cable, make sure you are using a"Standard TCP/IP" port with the RAW protocol(port 9100) andthat the selected IP address is in fact the one the printer is using you can use the ping command to test if the printer is accessible inside your network.
You can also learn more about the issue by using the ping command to search your domain controller by IP address and other network servers by name and IP address.