Examples of using Maximum voltage in English and their translations into Romanian
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Ecclesiastic
-
Computer
-
Programming
Battery Maximum Voltage 4.25 V.
Perhaps if we give him maximum voltage.
Maximum voltage between any terminal and earth ground.
Whistling with a maximum voltage of 15 seconds.
Maximum voltage between any terminal and earth ground.
Withstand voltage test maximum voltage specif….
Maximum voltage between terminal and earth ground(module).
Withstand voltage test maximum voltage specific….
The maximum voltage between phase and neutral is 250V.
Listen, the batteries are connected a number,to get maximum voltage.
The maximum voltage between each phase and neutral is 250V.
The maximum cable length is 30 metres, the maximum voltage 30 V.
The maximum voltage acceptable to the system is up to 1500V.
Two, was' asleep on the chair Edison Electric maximum voltage.
Final Charge with maximum voltage up to 100% battery capacity.
Maximum voltage fluctuation: not beyond the rated value by±10%.
KV system withstand voltage test maximum voltage does not exceed 270KV.
He maximum voltage acceptable to the system is up to 1500V.
Withstand voltage test maximum voltage specification[Aug 13, 2018].
The maximum voltage is giving a bright light, in which you can receive guests or read.
The bend steel girder calculate the maximum voltage by constructing diagrams of normal stresses.
Maximum voltage applied between any terminal and earth ground or between any two terminals.
As time increases the current battery voltage is reduced to 0 when it reaches the maximum voltage of the battery.
The maximum voltage is 30 V, the maximum cable cross-section is 3.9 mm.
Resistors are not only specified with a maximum power dissipation,but also for a maximum voltage drop.
The maximum voltage of 10KV system withstand voltage test does not exceed 42KV.
The UMT-H Series now offers 19 types of fuses in the current ranges from 160 mA to 10 A at a maximum voltage of 277 VAC/250 VDC.
This is the maximum voltage that can be placed from drain to source when the MOSFET is turned off.
Stress Analysis can check parts for stress conditions such as maximum power dissipation and maximum voltage and current limits.
The system also monitored signals at the chip level to analyze the electrical signals for parameters such as rise/fall times,minimum/maximum voltage levels.