Examples of using Maximum voltage in English and their translations into Swedish
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Ecclesiastic
-
Official/political
-
Computer
-
Programming
-
Political
We're way over maximum voltage.
Maximum voltage with 10:1 or 100:1 probe.
Volt 800 Feel the power or maximum voltage.
The device's maximum voltage measured in volts.
KV transformer withstand voltage test maximum voltage.
People also translate
The maximum voltage: 30 V DC, reverse polarity protection.
Peak voltage: Â The device's maximum voltage measured in volts.
Maximum voltage between terminal and earth ground(module).
Gold contacts are available and the maximum voltage is 250 VAC.
Finally, the maximum voltage(13V or 13mS) is reached.
KV transformer withstand voltage test maximum voltage.
He maximum voltage acceptable to the system is up to 1500V.
KV transformer withstand voltage test maximum voltage 68KV.
Specifications Maximum voltage between any terminal and earth ground.
Add your review Review Volt 800 Feel the power or maximum voltage.
The maximum voltage acceptable to the system is up to 1500V.
KV system withstand voltage test maximum voltage does not exceed 270KV.
The maximum voltage is 30 V,
All these solar power connectors can meet below requirement: Maximum Voltage: 1000V.
Specifications Maximum voltage between terminal and earth ground(module).
mechanical strength, maximum voltage and permissible heating.
The maximum voltage of 10KV system withstand voltage test does not exceed 42KV.
the voltage amplitude of the sum of the maximum voltage amplitude of Vmax,
The maximum voltage is giving a bright light,
gate capacitance which can otherwise exceed the maximum voltage allowed on the gate terminal.
The maximum voltage acceptable to the system is up to 1500V. The maximum annual attenuation is 0.5.
installed motor(one motor winding) has a maximum load of 230 V. 400 V is the maximum voltage that the motor's outer conductor can handle.
The maximum voltage of the 35KV system withstand voltage test does not exceed 100KV.
i.e. the current should not exceed the maximum voltage value; for transformer winding divided power should strictly control the power so as not to burn out the transformer winding.
This is the maximum voltage that can be placed from drain to source when the MOSFET is turned off.