Examples of using Bottom side in English and their translations into Russian
{-}
-
Official
-
Colloquial
Pull up from the bottom side.
The bottom side and the internal surfaces of the cabinets.
System label is on the bottom side of the device.
Tips: The volume of DVD use is shown on the bottom side.
Collect dust from bottom side when joining circuit boards.
People also translate
Bottom side of the board must be fully metallized.
Collect dust from bottom side when joining circuit boards.
More than two splices in any one top or bottom side rail;
Collect dust from bottom side when joining circuit boards.
The restraint system will now wind up on the bottom side.
Two bottom side slash pockets with zipper closure.
Furniture is processed from the bottom side, closer to the floor.
Tilt the bottom side of the front panel upwards and remove it.
The connector is well weird:resembles a flat on bottom side USB.
Collect dust from bottom side when joining circuit boards.
You can change the slideshow settings by pressing the bottom side of the multi-selector.
Press the bottom side of the control wheel during movie playback, then select.
The females lay their eggs on the bottom side of Artichoke plants.
The bottom side entry agitators are used in process and storage tanks in the applications of.
IFP Interface Inputs, Outputs left bottom side of IFP right side of IFP.
Bottom side it is translucent, it provides a stunning view of internal organs of amphibians;
Second, unlike drilling, there is no burr produced on the bottom side of a stamped hole.
At the bottom side of cephalothorax between extremities there are sternites fig. 4.5-8; fig. 7.7-11.
The technical information are situated in the rating plate on the bottom side of the appliance.
The bottom side entry agitators are used in process and storage tanks in the applications of the.
Pull the seat board(7) into the fi xtures(35) on the bottom side of the infl atable seat(8)- see detail B.
The bottom side entry agitators are used in process and storage tanks in the applications of the food-processing industry.
Condensate drain Check the air conditioning system's condensate drain at the cabin bottom side regularly.
Some SMT components can be placed on the bottom side of the board and soldered by the wave soldering process.
Bottom side wires are subject to the highest loads in flight, and are therefore the most critical.