Examples of using Device must in English and their translations into Russian
{-}
-
Official
-
Colloquial
Their device must be.
Device must be rooted.
Requirements Device must be rooted.
The device must measure oil content to within +-5 ppm.
Your Android device must be rooted.
People also translate
The device must be tested for accuracy(calibrated) after 2 years.
The clearance around the device must be at least 25 cm.
The device must be in there.
In order to operate on a network, any connecting device must know the network name.
The device must be in the main menu.
The minimum clearance around the device must be at least 5 cm fig. 2, page 3.
The device must be kept under the conditions.
If malfunction can not be fixed, the device must be checked by customer service.
The device must be switched off.
Connect the device to the mains. When doing so, the device must be switched off.
The device must be used only for dry hair.
For the entire duration of the navigation through the bridge, the radiotelephone device must be turned on.
This device must be connected to an earth conductor!
For the entire duration of the navigation through the bridge, the radiotelephone device must remain switched on.
The device must be in a good working condition.
When performing any work,repairs or maintenance, the device must always be disconnected from the power supply.
The device must be in a good working condition.
Step 2- Power on the NAS When first booting a diskless Seagate NAS Pro, the device must be placed into recovery mode.
The device must be properly connected to the earth circuit.
Working on Air-handling Unit When performing any work, repairs,maintenance or cleaning, the device must always be safely disconnected from the power supply.
The device must be mounted above the chosen tapping point.
To comply with the limits of the Class B digital device, pursuant to Part 15 of the FCC Rules, this device must be used with certified peripherals and shielded cables.
The device must be removed from the pipeline before cleaning.
Internal memory error, caused by a hardware or software problem F Restart the device; if the error occurs again the device must be sent back to the manufacturer with an indication of the error.
This device must be connected to a protective earth circuit.