Examples of using Drying temperature in English and their translations into Russian
{-}
-
Official
-
Colloquial
Optimum drying temperature.
Drying temperature:≤110℃(aluminum).
Typically, the most important parameter to adjust is the drying temperature.
Set the desired drying temperature in the drying temperature thermostat.
With timer to set processing time, the drying temperature can be adjusted.
The final drying temperature reaches 320° F and takes around 40 hours.
Keep an eye on possible over flight of the grains and the drying temperature.
The more uniform the drying temperature, the better the automation operates.
This means that the temperature in the inlet air channel is below the pre-set drying temperature.
Drying temperature depends on the quantity of ink, the speed of the conveyor belt, the weight of the fabric,….
The relative air humidity must not exceed 60% and the drying temperature must not be below +15 C.
Keywords: study infrared grinding, moisture,beet, drying temperature, heat flux.
Stepless control of the drying temperature allows all agricultural cereals to be dried. .
The suction opening must be reduced so much that the desired rise of temperature shows in the drying temperature gauge.
After the last coating application, the drying temperature should be maintained at above +15 C for at least 18 hours.
We do not want artificial performance increase in a machine through excessive elevation of the drying temperature at the expense of product quality.
The design permits the use of the highest possible drying temperatures(where product allows) and is not sensitive to fluctuations in throughput or particle size.
Wide adjustment range for the drying gas temperature(150 to 1,000 C), so that the right drying temperature can be set for all products.
If the maximum drying temperature of 100 C is applied, the"limit" value for the thermostat must be raised to 130 C, so that the burner will be switched off if this temperature for any reason will be attained malfunction.
On a project-specific basis,boundary conditions such as drying temperature, air volume and product parameters can be readjusted and scaled.
An experimental study of the process of drying leaves and shredded celery isolated infrared wavelengths, depending on the height of the layer of leaves andshredded celery stalks, drying temperature, the heat flux density on the mesh tray made of stainless steel with a mesh size of 2 mm.
Naturex AG Company produces fruit powders cold spray method(drying temperature not exceeding 50 º C) drum and vacuum drying. .
The amount of error will vary depending on the amount of moisture removed and the drying temperature, but the meter reading error may be 2 percentage points.
In order to achieve this, adjustments must be made to the setting parameters such as drying temperature, drying program and sample weight as well as the handling of the sample.
Type SO500, heat input up to 500 kWt,drying performance- 400-500 kg/h of wheat, drying temperature- 65 °C, input humidity of grain- up to 25%, output humidity- 14%, power input- 29 kW.
The BTL 1/ 3000-9 Stela wood chips belt dryer has a thermal input up to 1200 kWt,an output power of 2,100 kg/ hr. and a drying temperature of 80° C. The dryer has an automatic moisture control system and wet belt wash.
An experimental study of the drying process of parsley leaves isolated infrared wavelength depending on the height of the bed of parsley, drying temperature, heat flux density, distance from the infrared emitter to the product layer on the pallet mesh stainless steel mesh size of 2-2 mm.
If you have a look at any psychrometric table in which temperatures are indicated within 0,1 C,one can see that at about 70% humidity the error measurement of wet and dry temperature difference 0,2 C leads to a calculation of 2% humidity error.
It has two clearly defined seasons:rainy and dry. Temperatures tend to be high as a result of its predominantly low-lying terrain.
