Examples of using Freq in English and their translations into Russian
{-}
-
Official
-
Colloquial
Ultrason., Ferroelect., Freq.
Press FREQ/RDS to choose the mode.
Common problems with the FREQ file.
Freq- frequency of filter frequency variation in Hz.
With these settings you can set Min frequency Freq.
Min Freq(Hz)- minimal frequency of a shown range.
Graphics Settings: Max freq, min freq, governor.
Max Freq(Hz)- maximum frequency of a shown range.
Value( in 1-VAR stats)< 0 FREQ DOMAIN or non-integer.
Press FREQ/RDS again to restore the frequency display mode.
Equation for generating the above Minimum SRS Curve:ACCEL 1.95 FREQ 0.355.
With the values"Freq:" and"Slot:" You can quickly adjust the Adc.
If Use filter is on, and you set panorama value to -100% for example,right channel will be filtered by lowpass filter with cut-off frequency equal to Minimal freq value.
Each time you press FREQ/RDS, the type changes as follows.
LPF FREQ(low pass filter frequency) Selects the subwoofer cut-off frequency.
You put zero input voltage, reads the value"Freq:" andyou write it in the box"Min freq.
The freq parameter value should be a non-negative number- the wave frequency(in Hz).
Maximum input voltage rises,reads the value"Freq:" and you write it in the box"Max freq.
FOAM HF(High Freq): Transfer Matrix Method for modeling using Biot parameters.
In March 2011, he released"Love of Life", with a more modern and punchy house style, and it has been remixed by Sgt Slick,Digital Freq, and The Fusion& DJ Dima June.
Right Freq- the color of frequency response for the right channel in stereo mode.
This parameter(possible setting P250 MIN. FREQ.- P245 MAX. FREQ.) sets the skip frequency center.
Do not press FREQ/TEXT until a Radio Data System indicator lights up in the front panel display.
Wide belt with inner lamella belt, MSP sanding pad with 2 probes per actuator in the grid 25 mm, belt sizes 2620 x 1370 mm, 18,5 kW motor,2- 16 m/s belt speed with freq.
Separate drives with freq. inverters enable an independent control of each worm.
Freq(Hz)- cut-off(for lowpass and highpass filters) or center(for bandpass filter) frequency.
If the file with this structure is in the data editor of SPSS,and variable FREQ is used for weighting, a cross tabulation would produce the same original table with the desired association statistics.
Freq Min/Max- the color of the dash-dotted line indicating the minimum and maximum levels of frequency response.
Then you adjust"Max freq" and"Min freq", with the mouse wheel, to read approximately zero and 1000 in the box"Slot.
Press FREQ/TEXT repeatedly to display the various Radio Data System data offered by the transmitting station.