Examples of using Friction coefficient in English and their translations into Russian
{-}
-
Official
-
Colloquial
The assumed ground friction coefficient.
The friction coefficient is defined as.
Unstable torque because of wide range friction coefficient.
Super low friction coefficient with self-lubrication.
GRRF may wish to revisit the subject on the peak friction coefficient PFC.
People also translate
The friction coefficient shall be calculated with the following formula.
Higher performance in terms of fatigue, friction coefficient and wear resistance.
Stable friction coefficient for maximum braking performance.
Durable plastic coating for the plywood floor with a friction coefficient of μ= 0.6.
Low friction coefficient/ low coefficient of friction. .
Sliding friction tests of MoS 2 using a pin on disc tester at low loads(0.1-2 N)give friction coefficient values of.
The friction coefficient behaviour has been specially adjusted to meet the requirements of wet brakes immersed in oil baths.
These two technologies provide perfect surface condition andtheir combination is optimal for reducing the friction coefficient.
Their low friction coefficient, paired with a wide variety of counter-rotation materials, is a big advantage.
It is a high-strength bronze that displays excellent friction coefficient that leads to good wear resistance under severe loading.
Calculated from the tensional cross-section; utilization of the yield point 90% with friction coefficient μtotal 0.12.
PVDF has its minimum friction coefficient, which makes players comfortable and having fun while sliding down smoothly from the inflatable slide.
We go to landing, we were told the height of the clouds,visibility, the friction coefficient were at the limit, and we felt strong turbulence.
Dependencies of friction torque, friction coefficient, and the temperature in the contact area on the runtime are obtained on the base of the experimental data.
Optimization of the suspension composition andtemperature- time parameters of the process was performed for the friction coefficient of the films.
Treatment with optimal regime permits decreasing the friction coefficient of the tool steel surface in 8,3 as compared with untreated.
Thread friction coefficient DIN 946 The coefficient of sliding friction μ when tightening screws and nuts is determined on a screw test bench(relevant for screw pastes).
And the scorched plate layer that follows is given an innovative surface coating that ensures optimised friction coefficient right from the first stop.
Adopt the high quality thermoplastic plastic,has small friction coefficient, impact resistance, long life, acid porrf alkaline, resistant to moisture wet, etc.
The mating surfaces must be previously prepared(scratched, cleaned, degreased)in order to increase their friction coefficient and remove any oxide layers.
But now, inspectors check the friction coefficient, how much it meets the requirements and they clarify the pilot's actions and possibility of a late touchdown," the official told.
The primary desirable qualities are hardness, wear resistance, andslickness DLC film friction coefficient against polished steel ranges from 0.05 to 0.20.
RWMK friction coefficient measuring heads offer as multicomponent transducers the possibility of simultaneously recording the torque, axial clamping force on the screw connections and the frictional torque on the screw head or thread.
The expert from China raised a question concerning the peak friction coefficient(PFC) specified in Global Technical Regulation No. 3 on motorcycle brakes.
Based on the measured roughness parameters of the ductile iron socket pipe inner surface(manufactured by vonRoll hydro, Switzerland)with polyurethane coating the friction coefficient along the length was calculated.