Examples of using High friction in English and their translations into Russian
{-}
-
Official
-
Colloquial
High friction and.
Stops on a high friction surface.
Protection of harnesses in high friction areas.
High friction surface.
How do you justify this,Whereas some teams there is a high friction?
PARAGRAPH a. Stops on a high friction surface- as specified in paragraph 4.1.1.1.
Choose application: Conveyor/ transport Power transmission High friction feed Other.
On the high friction surface: 80 km/h or 0.8 Vmax, whichever is lower.
Putting on latex clothing can be difficult,because latex has high friction against dry skin.
A high friction surface immediately followed by a low friction surface.
The new wagons to be purchased will automatically be equipped with inserts with a high friction coefficient K.
The unique combination of high friction and impact results in extremely fine particles within the shortest amount of time.
It is clearly seen during testing: when the test rig is swithed off,the shaft stops immediately because of high friction.
The unique combination of high friction and impact results in extremely fine particles within the shortest amount of time.
A low friction surface immediately followed by a high friction surface with a PBC>= 0.8.
High friction vulcanised rubber gripping pads mounted on both plates protect the surfaces of the materials from being damaged or marred.
A wet low friction surface immediately followed by a wet high friction surface of> 0.8 PBC.
ROBA-slip hub Type 1_ _.1_ for high friction work and low torque values cup springs are single-layered, single contact force.
As set outin paragraph 4.9.3.1. but using the low friction surface instead of the high friction one.
High Friction fabric with soft Rubber Dotted Array prevents booster seat from sliding/ slipping while protecting your leather car seat from dents.
In order to obtain a sufficiently low PBC, the motorcycle may initially be braked on a wetted surface, andthen transition onto a dry, high friction surface.
Due to relatively low tear strength, high friction and limited abrasion resistance of these materials, they are generally recommended for static applications only.
Within 1 second of the rear wheel passing the transition point between the low and high friction surfaces, the vehicle deceleration shall increase.
Regarding stopping performance on a high friction surface, the ABS must operate to achieve at least 70 per cent of the nominal PBC of 0.9 required for the test surface.
Contactless rotation parts with variable speed and depth of immersion in specially selected tumbling body allow,given the high friction to achieve uniformity of treatment and reproducibility of results.
After passing over the transition point between the low and high friction surfaces, the vehicle deceleration shall increase. The informal group will conduct a validation test program to assess whether a value can be established for this rise in deceleration and the time that this rise takes.
The speed that will result in 50 km/h or 0.5V max, whichever is lower,at the point where the vehicle passes from the high friction to the low friction surface.
In an effort to better ensure a sudden transition between test surfaces,the proposed gtr makes the further precision that the low friction surface must be followed by a wet high friction surface with a PBC exceeding 0.8.
Damaged or blunt drill bits have considerably higher friction and can very easily get jammed or stuck.