Examples of using Reference mark in English and their translations into Russian
{-}
-
Official
-
Colloquial
Reference mark 0.146 Emax.
Activating the reference mark search", Page 136.
Reference mark search performed successfully.
Conducting the reference mark search", Page 183.
Reference mark search performed successfully.
Definition of the type of reference mark Settings.
The reference mark is disregarded.
Turning- Manual operation| Conducting the reference mark search 12 192.
The reference mark is disregarded.
Basic operation| Performing the reference mark search after startup 6 72.
The reference mark search was successfully completed.
Basic Operation| Performing a reference mark search after startup 6 66.
Reference mark search not performed or no reference mark detected.
Configuration of the offset between the reference mark and the zero point Further information.
The reference mark(I'M) of this maximum intensity…, shall be obtained by the ratio.
The preset table contains the absolute positions of the presets with respect to the reference mark.
The reference mark referred to in paragraph 4.2.2.7. above shall be obtained by means of the formula.
A separate pulse train, typically referred to as the Z reference, provides one pulse per revolution to act as a reference mark.
The reference mark referred to in paragraph 4.2.2.7. above shall be obtained by means of the formula.
Drawings of the main components of the device the drawings must show the intended space for ECE type approval mark or reference mark, as applicable.
If the reference mark search was not performed on startup, you can start it manually later.
On Class D headlamps meeting the requirements of this Regulation in respect of the driving beam,an indication of the maximum luminous intensity expressed by a reference mark, as defined in paragraph 6.3.2.1.2. below, placed near the circle surrounding the letter"E";
Reference mark search Start starts the reference mark search and opens the workspace.
Starting the reference mark search manually A manual reference mark search can be performed only by the Setup and OEM user types.
Reference mark search status Indicates whether the reference mark search was successful Display.
Stop of reference mark search Indicates whether the reference mark search was canceled Display.
Reference mark search not performed or no reference mark detected+Z Zo axis is coupled with the Z axis.
Reference mark search not performed or no reference mark detected+Z Zo axis is coupled with the Z axis.
If the reference mark search was not performed on startup, you can start it manually later.
The reference mark(I'M) of this maximum intensity, referred to in paragraph 4.2.2.6. above, shall be obtained by the ratio.