Examples of using The filter element in English and their translations into Russian
{-}
-
Official
-
Colloquial
The filter element does not have any dirt.
Unscrew and remove the filter element.
Detach the filter element and attach a new one.
Dust deposits are removed from the filter element.
The filter element must be exchanged annually.
Clean the lamellas of the filter element 6 with a soft brush.
The filter element gasoline chain saw Husgvarna.
Clean the thin plates of the filter element 16 with a soft brush.
The filter element is damp after vacuuming liquids.
Detach the filter element and attach a new one.
It is important that the level is kept below the filter element.
The filter element is the same for both elminator models.
At the latest, this takes place when the filter element is replaced.
Cleaning the filter element Replacing the filter element.
Align the metal ring downwards to better protect the filter element from deposits.
Now insert the filter element and close the filter cover.
Inside the housing, the main stream is forced along the filter element in a spiral.
Screw the filter element 6 on and pull it out of the dust box 7.
In order to ensure effective ventilation, the filter element must be always free of deposits.
The filter element can easily be removed by turning the handle 90°.
Note: To ensure optimum dust extraction, empty the dust box 7 in good time and clean the filter element 6 at regular intervals.
See"Cleaning the filter element" and"Replacing the filter element.
In addition, if you remove the DPF,it completely eliminates the need for frequent access to the service for cleaning the filter element and replace it.
The filter element can be replaced without shutting down the entire system.
If the machine is exclusively used for wetvacuuming, the filter element should be replaced by a special insert special accessory.
The filter element can quickly be changed without interruption and without tools.
Because the higher viscosity oil on the filter element once cooled,it will adhere to the surface of the filter element.
The filter element may become damaged and as a result moisture can penetrate into the housing.
After flushing the filter element must always be replaced see chapter Replacing the filter element> page 12.