Examples of using Multiplexer in English and their translations into Serbian
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
-
Latin
-
Cyrillic
IRD Multiplexer Transmitter.
Over then 200 PDH multiplexers.
Multiplexer now use Lan cable to connect.
Over then 500 SDH multiplexers.
The multiplexer now uses Lan cable to connect;
Ports E&M over E1 PCM multiplexer.
The multiplexer itself is connected to the TV by one single cable.
Ports voice over E1 PCM Multiplexer.
The multiplexer has all the functions of normal TS multiplexer, includi.
The selection of the mode is programmed into the middle multiplexer.
If you install more multiplexers/muxers, the program can output more video formats.
The compiler generates nanocodes which directly control functional units,registers and multiplexers of a given datapath.
Optimux-4E1 multiplexers provide low-cost, long distance E1 connectivity by extending multiple voice and data circuits over fibre optic links.
In short, I use Tilda for my terminal, Zsh(with Oh My Zsh) as my shell and tmux as a multiplexer.
It contains codecs(coder-decoder),filters, multiplexer, clock signal extractor, line coder and decoder(compression law A), in accordance with ITU.
The manufacturer of Samsung repeats itself in the name"One Connect", butnow there is no possibility to update the multiplexer with different Evolution Kit from the beginning of 2017.
Circuit analysis combining with standard modules(multiplexer, demultiplexer, encoder, decoder, incrementer, decrementer, comparator, ALU, adder and substractor).
At present, chip-level devices that have been matured based on Silicon Photonics processes mainly include optical waveguides, multiplexer devices, external modulation devices, APD receivers, etc.
Circuit analysis combining with standard modules(multiplexer, demultiplexer, priority encoder, decoder, incrementer, decrementer, comparator, and an arithmetic logic unit, adder and substractor).
Croatia Control, the organisation responsible forairspace regulation in Croatia, has selected RAD's Optimux-4E1optical line multiplexers to connect air traffic control towers at the Dubrovnik and Zadar airports.
Usage of standard combinational modules(multiplexer, demultiplexer, decoder, coder, incrementer, decrementer, serial/parallel adder, arithmetic unit, logic unit, arithmetic-logic unit, comparator) and sequential modules(flip-flops, registers and counters).
Other circuits used in computers, such as half adders, full adders, half subtractors,full subtractors, multiplexers, demultiplexers, encoders and decoders are also made by using combinational logic.
In a modern digital telephone switch, application of two different multiplexer approaches in alternate layers further reduces the cost of the switching fabric:space-division multiplexers are something like the crossbar switches already described, or some arrangement of crossover switches or banyan switches.
Depending on the manufacturer, it may be possible to integrate a network router/switch or other equipment into an ADSL transceiver.At the Internet service provider: DSL Access Multiplexer(DSLAM)The Digital Subscriber Line Access Multiplexer(DSLAM) consists of a splitter and an ADSL transceiver.
Our main products include a range of PDH fiber optical multiplexer, E+E fiber optical multiplexer, 1+1 dual fiber interface back-up fiber optical multiplexer, voice fiber optical multiplexer, date video fiber optical multiplexer, fiber modem series, protocol converter series, optical fiber transceivers series, timeslot multiplexer, PAS repeater series and so on.
Before PALs were introduced, designers of digital logic circuits would use small-scale integration(SSI) components, such as those in the 7400 series TTL(transistor-transistor logic) family; the 7400 family included a variety of logic building blocks, such as gates(NOT,NAND, NOR, AND, OR), multiplexers(MUXes) and demultiplexers(DEMUXes), flip flops(D-type, JK, etc.) and others.
Notable features of the RISC-V ISA include a load-store architecture,bit patterns to simplify the multiplexers in a CPU, IEEE 754 floating-point, a design that is architecturally neutral, and placing most-significant bits at a fixed location to speed sign extension.[1] The instruction set is designed for a wide range of uses.
Reading and writing to DRAM is performed by selecting the row and column data addresses of the DRAM as the inputs to the multiplexer circuit, where the demultiplexer on the DRAM uses the converted inputs to select the correct memory location and return the data,which is then passed back through a multiplexer to consolidate the data in order to reduce the required bus width for the operation.