Examples of using Digital effect processor in English and their translations into Spanish
{-}
-
Colloquial
-
Official
This GEQ works independent of that featured on the Digital Effect Processor.
A digital effect processor is available for adding effects. .
This control alters the signal level that is sent to the FX mix to be processed by the digital effect processor.
Two digital effect processors are available for adding effects. .
These ports are for the inclusion of a foot switch,used to remotely change the built-in digital effect processor between on and off.
The input for the digital effect processor is taken from the Smartman's AUX mix.
This port is for the inclusion of a non-latching foot switch,used to remotely adjust properties of the built-in Digital Effect processor.
In addition to this, the digital effect processor can be used as a stereo 31-band graphic equalizer.
Foot Switch Jack The foot switch port is for the inclusion of a foot switch, used for remote activation anddeactivation of the built-in Digital Effect processor.
The Smartman has a flexible digital effect processor that provides a number of useful effects with numerous user-adjustable parameters.
This control adjusts the final level of the EFX mixing bus(as taken from the EFX level controls on each channel strip), the audio of which is sent to the AUX Send 2(on the AM442D USB) andthe AUX Send 3(on the AM642D USB) outputs, as well as the built-in digital effect processor.
This button is pushed to allow the signal from the Digital Effect processor to be sent to the Control Room outputs for monitoring purposes.
The Smartman Digital Effect Processor features a number of different Reverb effects, an echo effect, tap delay, chorus effect and flanger effect. .
This feed may be used to connect to an external digital effect processor, or even to an amplifier and speakers, depending on your desired settings.
Each digital effect within the Digital Effect Processor has its own user-adjustable parameters that vary depending on the effect type.
These 1/4” TS outputs may be used to connect to an external digital effect processor, or even to an amplifier and speakers(depending on your desired settings), to the mixer.
These 1/4” TS outputs may be used to connect to an external digital effect processor, or even to an amplifier and speakers(depending on your desired settings) to the mixer.
Channel mixer with built-in digital effects processor Reverb/Chorus.
Use these LEDs to monitor the signal in the DIGITAL EFFECTS PROCESSOR.
These can then be fed into the Digital Effects Processor and sent out the speaker or through the left/right outputs.
The DFX2000 is a high-definition digital effects processor with 101 amazing algorithms, all of which were developed in-house our engineers.
Professional 20-channel mixer with 2 outputswith independent volume controls. USB/SD/MP3 player. 16 digital effects processor.
A metronome andseveral educational functions are provided, while three digital effects processors(Reverb, Chorus and MFX) can be used to further enhance the already amazing sound quality.
According to Guitar World It can be used to control an"effects processor, digital synthesizer or even stage lighting.