Examples of using The basic setting in English and their translations into Spanish
{-}
-
Colloquial
-
Official
Confirm the basic setting done with ENTER.
Choose Disabled to close the basic setting.
The basic setting can be individually adjusted.
Just select the basic setting you want to load.
Next actuation of button(PLAY ALL) Return to the basic setting.
The basic setting appears:+ symbol: 30 minutes.- symbol: 10 minutes.
This function is used to return the control unit to the basic setting.
This is the basic setting for the URL match.
After selecting the recording area,the next step is to change the basic setting.
To return to the basic setting, press the button TIME once again.
Is illuminated, indicating you are now listening to normal stereo signal,which is the basic setting.
You can change the basic setting by turning the rotary selector.
To ensure a proper functioning of the tyre control display,it is necessary to repeat the basic setting every 10 000 km or once a year.
The basic setting for machines with 17” tyres is position 3.
Level 2 is the basic setting for dry conditions and runs at 8,500rpm.
The basic setting for the image resolution is 3.0 megapixels.
To save the basic setting, just click at„Save My PCB configuration.
The basic setting of your network will look as illustrated.
In this case, the basic setting of the switches should be checked and adjusted if necessary.
The basic setting of the driver assist systems cannot be performed.
In the basic setting after switching on, the display will show.
The basic setting principle is explained by means of the following examples.
The basic setting of the projector therefore projects a rather cold image.
The basic setting of the radio functions is the same for all broadcasting ranges.
In the basic setting, when all DIP switches(68) are in the upper position, the frequency shift is 2 Hz.
The basic setting is richer than the optimal setting and should be maintained for the first few hours the machine is in use.
After the basic setting, mix the input signals with the channel faders(6) to the desired volume ratio or fade them in or out, if required.