Examples of using Trigger input in English and their translations into Spanish
{-}
-
Colloquial
-
Official
Must be connected to the trigger input on the rear panel.
Trigger inputs: 5 Special stereo microphone inputs. .
Set to Trigger if the 12V Trigger input is used.
Dedicated trigger input to drive the internal sequencer.
Acquisition synchronization capability through external trigger input.
Channel external trigger input, 1 channel flash output.
Trigger inputs can be individually inverted(active low or high).
In other cases you might need to add a Schmitt Trigger input which did not.
External trigger input, 1 flash trigger output Shell size.
When the switch is set to the Off position, the 12V trigger input is not active.
There are 16 trigger inputs and 4 digital inputs available.
With the SISTORE MX there are 32 trigger inputs and 8 digital inputs available.
The trigger input level will be displayed as a% in the upper right hand corner of the display.
This can also be an AC outlet power strip equipped with a 12V trigger input.
The C270's Trigger Input will now follow the source component's 12V trigger output.
The TRIGGER OUT provides the capability to turn-on another power product that has a trigger input.
Trigger Input Number[Range] 1-10 This number indicates the trigger input number of the pad that was last struck.
When the rim is hit, pad events triggered from the same pad(trigger input jack) can be simultaneously transmitted with rim switch events.
Tom 4 Trigger Input: Connect an optional drum pad to this input using a standard 1/4”(6.35 mm) TS cable.
If the same MIDI note number is set to more than one pad within the same drum kit,the lowest numbered Trigger Input Jack will take priority.
You can select a zone of each trigger input for editing by striking that zone of the trigger, or highlighting the trigger location on the SampleRack display screen and then pressing Cursor Left or Cursor Right.
This output allows to remotely switch on oroff ancillary equipment such as a tuner, power amplifier, etc. which are also equipped with a 12V trigger input.
If multiple layers are set to the same velocity range on a pad or external trigger input, they will both trigger at the same time when the pad or external trigger is struck.
You can enable power link operation when you connect the unit andan external device such as power amplifier equipped with 12V trigger input jack.
Drum Kit Data This mode is used forsetting drum kit voices, for example, assign a voice to each pad(trigger input source) used in the drum kit and perform settings such as selecting the voice, tuning, reverb level.
Drum Kit Voice Edit Mode This mode lets you set which voice andhow it will be triggered for each pad(trigger input source) in the currently selected drum kit.