Examples of using Input signal in English and their translations into Swedish
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Ecclesiastic
-
Official/political
-
Computer
-
Programming
-
Political
Input signal and peak metering.
Modulated by an input signal.
Input signal: Balanced/unbalanced.
Base: Squared version of input signal.
And with input signal one to one.
Trigger samples by analyzing the input signal.
Idle, input signal locked, memory failed or.
Swell: a volume effect swell on the input signal.
And with input signal one to one.
The VCO can be frequency modulated(FM) by the input signal.
The input signal must not exceed the allowed strength!
They convert a 0… 10 V DC input signal to a relay output.
Available features may vary depending on the input signal.
Mix Sets the blend of input signal and VCO signal. .
Main input with low/ high switch for adjusting the input signal.
Square: Sets level of input signal affected by the square wave.
The input sensitivity is 5mV and the max input signal is 10mV.
Traces of a step input signal and the filtered output signal. .
Adjustable Compressor with Threshold and Mix for your input signal(Dry mode).
Subharmonic: Sets level of input signal affected by the subharmonic.
Gain shows the level of the output in relation to the input signal.
This allows you to check if the input signal is too high
You can also press Source to select your desired input signal.
True Bypass sends input signal to output directly when the effector is off.
Dimming Control Operation via potentiometer or from an input signal of 1- 10 Vdc.
True Bypass sends input signal to output directly when the effector is off.
Integrated pre-amp with Microphone Gain Control allows control of input signal strength.
True Bypass sends input signal to output directly when the effector is off.
Integrated headphone amplifier with volume control allows you to directly monitor your input signal.
True Bypass sends input signal to output directly when the effector is off.