Examples of using Load current in English and their translations into Thai
{-}
-
Colloquial
-
Ecclesiastic
-
Ecclesiastic
-
Computer
Load current≤200mA.
Gearmotor no load current(A).
Load current: 1A/3A.
Current:0.5A Max Load Current: 1A.
No load current:<5A.
It is nothing with direction of the flow of load current. Complying with standard IEC 62053-21.
Load current:≤100mA.
For use with rare load current and other usage conditions.
Load current 1.5A continuous.
Nothing with direction of the flow of load current. Complying with standard IEC 62053-21.
No Load Current 5A20ms.
FZN12A-12D type pneumatic type load break switch can open and close load current and overload current. .
No load Current: 0.23A.
In Master/slave mode, the user only need to control the master one, the load current will be automatically calculated and downloaded to the slave loads. .
Load current 1.5A continuous.
Measurement of 3 phase 4 wire active energy consumption in one directions by three elements, independent of load current flow direction, in accordance with IEC 62053-21.
Rated load Current: 1.8A.
The VCB conforms to GB 1984-2003 and IEC62271-100. The VCB may supply the industry and mining enterprise, the power plant and the transformer substation using of as the analysis and synthesis load current, the excess current, the fault current, and is suitable for thr frequent operation place.
Max. load current: 200mA.
ZW20-12 outdoor column on Vacuum Circuit Breaker series three-phase ac 50 hz outdoor high voltage switch equipment, mainly used for 10 kv power system of rural electric network and city, as points and load current, load current and short circuit current, can also be used to other similar places. The breaker can match an isolating switch combination circuit breaker.
Max. load current: 200mA.
First, the use of methods: 1 the type of DC contactor should be selected according to the type of the load current and the light weight of the load, that is, the AC or DC load, is the light load, the general load or the heavy load. .
Load current: less than 7.5A.
Switches load current by using electromagnet.
Load current 100mA Max at 24 VDC.
When the grate fails and the load torque is too large, the load current increases to a certain value, and the inverter automatically cuts off the power, thereby protecting the grate and the reducer.
Load current:≤5A Protection class: IP66.
Max load current: 2A each color.
Load current≤1000mA Housing material Stainless steel housing.
Max load current: 4 A each color.