Examples of using Load current in English and their translations into Norwegian
{-}
-
Colloquial
-
Ecclesiastic
-
Ecclesiastic
-
Computer
Full load current: 10A.
FZN12A-12D type pneumatic type load break switch can open and close load current and overload current. .
No load Current: 0.23A.
View live status information, including solar watts, battery voltage,charge current, load current and more.
Rated load current: 600mA.
SPL-RF04 work with very low power consumption, andrange from AC 90V to 240V, maximum load current is up to 10A.
Max load current: 2A each color.
From what I saw miners generally stop buying their network equipment when not withstand the load current.
Single Switches manage a load current of 8A, and Double Switch of 6.5A per channel and 10A overall1.
FZN12A-12D type pneumatic type load break switch can open and close load current and overload current. .
Ripple is relatively unaffected by load current, but can be decreased by external capacitor filtering.
This is because the core and the winding have some defects, so thatthe leakage magnetic impedance increases, and the load current flows through the impedance.
It is mainly used to break and close the load current, over load current, and short circuit current. .
If load current of one channel is larger than 1A, you need to increase the purchase of C or greater power product to meet the requirements, this will increase the cost a lot, you can choose the combination?
And 325 are designed to verify the presence of load current, AC voltage and continuity of circuits, switches, fuses and contacts.
If load current of some channel is larger than 1A, you need to increase the purchase of C or greater power product to meet the requirements, this will increase the cost a lot, you can choose the combination of C+ EUPB0405 to amplify the power, which can significantly reduce the cost and facilitate clients to stock up.
FZN12A-12D type pneumatic type load break switch-fuse composite apparatus can open and close load current, overload current and breaking circuit short circuit current. .
It can be used for CO load current, closed-loop current, no load transformer and cable charging current. .
FZN12A-12D type pneumatic type load break switch-fuse composite apparatus can open and close load current, overload current and breaking circuit short circuit current. .
It is used for CO load current, closed-loop current, no load transformer and cable charging current, making short circuit current. .
Under normal circuit condition,high-voltage load switch can make, bear and break load current, and has the ability to make short-circuit current, and bear short-circuit current in certain times.
If load current of one channel is larger than 1A, you need to increase the purchase of C or greater power product to meet the requirements, this will increase the cost a lot, you can choose the combination of C+ EUPB0205 to amplify the power, which can significantly reduce the cost and facilitate clients to stock up.
Make and break all currents within the scope of their ratings,from small inductive and capacitive load currents up to the full short circuit current, and this under all fault conditions in the power supply system, such as earth faults, phase opposition, and so on.
Work, the load current is also through the output impedance, LED Street Light if the drive circuit by the buck, rectifier filter after adding DC constant current source circuit or a common switching power supply and resistance circuit, on which must also consume a lot of active Power, so these two types of drive circuit in the basic to meet the premise of constant current output, the efficiency is not high.
In order to prevent damage to large current directly through the sensor body sensor,can increase in the load current bypass connection means should be used to make braided copper wire current bypass device, and at both ends of the connection device is loaded with a clamping bolt;
Use it to verify the presence of load current, AC voltage, and continuity of circuits, switches, fuses and contacts.
Record the battery pack float voltage, cell float voltage, load current, ambient temperature, and other setting parameters of the rectifier(or switching power supply), and check that all screws are tightened.
Can be used to open or close loading current, over-loading current and short-circuit current. .
When it look a little over-loaded,please reset it according to the loaded current, to guarantee the safety of this equipment.