Examples of using Load current in English and their translations into Swedish
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Ecclesiastic
-
Official/political
-
Computer
-
Programming
-
Political
Motor maximum load current: 4.5a.
maximum load current is up to 10A.
Output Current: 800mAh(load current should not over 800mAh).
Thyristors with Gate currents from 100µA up to 90mA and load currents(hold and lock) of 100mA.
Devices with a load current greater than 50 A can only be mounted on the wall.
Maximum position 400Hz+/- 75Hz/ampere load current change.
Single Switches manage a load current of 8A, and Double Switch of 6.5A per channel
Overheating and overload protection(triggered when load current exceeds 2.5A).
It can be used for CO load current, closed-loop current,
FZN12A-12D type pneumatic type load break switch can open and close load current and overload current. .
Power Description: external voltage 10.8~ 12.5V 500mA load current over DC power supply,
FZN12A-12D type pneumatic type load break switchcan open and close load current and overload current. .
Thyristor power controllers up to a load current of 100 A can be either clipped to a 35 mm mounting rail or fitted to the wall on a mounting plate.
LCD screens to both show voltage and load current.
It is mainly used to break and close the load current, over load current, and short circuit current. .
the leakage magnetic impedance increases, and the load current flows through the impedance.
Fourth, because the voltage drop across the resistor depends on the load current, this method has very poor regulation
If load current of one channel is larger than 1A,
Power Factor Correction(PFC) is engineered to harmonise the phases of the load current and power supply voltage to ensure reliable operation under stressful conditions.
If load current of one channel is larger than 1A,
FZN12A-12D type pneumatic type load break switch-fuse composite apparatus can open and close load current, overload current and breaking circuit short circuit current. .
cell float voltage, load current, ambient temperature,
closing high-voltage circuit in the no-load current and load current, but also in protecting relay when short circuit.
can increase in the load current bypass connection means should be used to make braided copper wire current bypass device,
Calculations have been carried out on the basis of two possible approaches with two different load currents, which shows that the two power grids have sufficient capacity to cope with an interconnection.
high-voltage load switch can make, bear and break load current, and has the ability to make short-circuit current,
Loading current sales.
Can be used to open or close loading current, over-loading current and short-circuit current. .
please reset it according to the loaded current, to guarantee the safety of this equipment.