Examples of using Typical value in English and their translations into Vietnamese
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
UV is a typical value.
Typical Values(Weight%).
Item Unit Typical Value.
Typical values can reach 45%.
What does typical value mean?
Typical value with an LWD of 50 mm.
Grade Chemistry(Typical Values).
(typical value),after 1 minute of.
Electro-optical conversion rate: Typical values can reach 45%.
Typical values are 15 to 150 milliseconds.
Elongation is a Maximum Value and UV is a typical value.
Typical values lie between 1 GHz and 5 GHz.
Command to initiate the system reboot. Typical value:/ sbin/ reboot.
Typical values for EAF range from 0.9 to 1.4.
The“minimum average roll value” is amiddle ground between the absolute minimum value and the typical value.
Typical value is not regular value. .
This implies that the pulsar is moving at a velocity of about 440,000 miles per hour,close to a typical value for pulsars.
Lifetime Typical Value 100000hrs on half brightness.
When the 9PFLST is used without external power, the power available to the FiberOptic transmitter may be less than the typical value.
A typical value of N used by Dynamo's users is 3.
Experience more everyday with the full support of a long-lasting 4,200mAh(typical value)10 battery with intelligent power saving technology.
Time is a typical value that is easily overlooked by people.
Die casting Lamp Led heat sink housing The advantages of die casting include the casting with excellent dimensionalaccuracy Usually this depends on the casting material the typical value is the initial 2 5 cm size when the error is 0 1 mm and the error is increased by 0 002 mm for each additional 1 cm Compared to other casting processes its cast….
Typical value is the estimated average value considering the deviation in battery capacity among the battery samples tested under IEC 61960 standard.
Payload Byte Type Typical Value note 0 Unknown 0x1 1 Printing Margins?
The shape factor has a typical value of about 0.9, but varies with the actual shape of the crystallite; λ is the X-ray wavelength; β is the line broadening at half the maximum intensity(FWHM), after subtracting the instrumental line broadening, in radians.
Each of his works bears the typical value of each artist representing the different stages of Vietnamese art history.
All performance parameters are the typical value in the case of temperature 25℃, 100% load measurement, unless otherwise specified.
Usually this depends on the casting material, the typical value is the initial 2.5 cm size when the error is 0.1 mm, and the error is increased by 0.002 mm for each additional 1 cm.
More specifically, regression analysis helps one understand how the typical value of the dependent variable(or‘criterion variable') changes when any one of the independent variables is varied, while the other independent variables are held fixed.