Примеры использования Measuring unit на Английском языке и их переводы на Русский язык
{-}
-
Official
-
Colloquial
Measuring unit.
The pulses are received by the measuring unit.
Measuring unit to 9 cm.
Embedded shunt as a measuring unit;
Measuring unit(signal processing unit)- 1 pc..
Insert the span ring into the measuring unit.
Nm Newton meter, measuring unit for the engine torque.
Embedded transformer as a measuring unit;
Nm Newton meter, measuring unit for the engine torque.
Take the upper span ring 1 out of the measuring unit.
The measuring unit of reactive energy is kvarh kilo Volt Amps reactive hours.
All saved values are displayed in the new measuring unit.
Modular design, measuring unit and digital display separate.
Insert float into the lower float guide in the measuring unit.
The built-in measuring unit shows an accurate result after approximately five minutes.
Take the upper float stop 2 andfloat 5 out of the measuring unit.
Set the date,time and measuring unit(KG, LB, ST) one after the other by pressing the or buttons.
Maybe someone would want to give up minutes as the measuring unit of time.
The measuring unit consists of a metal cone in which a float can move freely up and down.
The new"Rotation angle unit" model variable presets the measuring unit for the angle.
The metallic measuring unit can be sent to metal recycling after the indicator housing has been removed.
Regula 6001 consists of two separate units: a measuring unit and a sensor unit. .
In order to use the Measuring Unit ANALYSETTE 22 NanoTec you will need a dispersion unit. .
Without releasing it press the„M“ button to switch to the desired measuring unit.
The component description also includes the measuring unit in which the values are given.
The measuring unit of conductivity are µS/cm(microsiemens/centimeter) or mS/cm millisiemens/centimeter.
Retrofit the supplied damping cylinder with the integrated float stop 2 into the measuring unit.
During the period of speed measurement,you can change the measuring unit just by long pressing the«MODE» button.
OID-3M is a system, the measuring unit of which is installed in the tool holder or in the moving elements of the machine carriage.
Structurally, the hardware of"AMSAT-Covert" is designed as a measuring unit and the system of electrodes.