Примеры использования Nominal voltage на Английском языке и их переводы на Русский язык
{-}
-
Official
-
Colloquial
Nominal voltage of the REESS V.
Cooling capacity at dT 0 and nominal voltage 1 67W.
Nominal voltage of the battery V.
The values given are valid for a nominal voltage[U] of 230 V.
Nominal voltage of the battery REESS V.
The capacity of the booster heater at nominal voltage.
Nominal voltage of the battery V.
The capacity of the booster heater at nominal voltage.
Nominal voltage Maximum design speed Hydraulic oil demand.
The capacity of the optional bottom plate heater at nominal voltage.
Nominal voltage controlled network 127V, 220V or 380V;
Ii the types of current and the nominal voltage and, for alternating current, the frequency.
Nominal Voltage Details 240/120V or 208/120V split phase output.
Once the brake is released,it needs to be switched over to the nominal voltage curve 2.
Nominal Voltage Details 120v nominal output in battery mode.
The battery is a valve-regulated battery with 12 V nominal voltage.
Nominal Voltage Details 120V factory-default nominal voltage. .
The capacity difference between the second andfirst step of the backup heater at nominal voltage.
External Power: Nominal voltage DC12V(car power, cigarette lighter output).
The nominal energy is calculated by multiplying nominal voltage by rated capacity.
Dimensions Specifications Nominal voltage~(AC) 230 V -15% +10% Frequency 50 Hz Power consumption approx.
Basslink is a monopolar with metallic return HVDC operating at a nominal voltage of 400 kV DC.
The nominal voltage of these Turnigy Ni-ZN cells is 1.6V compared to that of only 1.2V with Ni-CD/Ni-MH.
On overexcitation, the brake is initially energised with a voltage higher than the nominal voltage.
If the battery is discharged below its nominal voltage, this can lead to processes that damage or destroy the battery.
Nominal voltage means the approximate value of the voltage used to designate or identify a cell or battery.
It must not be used in power circuits with a nominal voltage higher than 300 V AC More details in Section 6.“Environmental conditions”.
To apply the correction function, the electric power to the battery must be calculated from the measured current and the nominal voltage value for each phase of the WLTC test.
The electrical isolation value Ri(in Ω)divided by the nominal voltage of the tested-device(in volts) results in the isolation resistance in Ω/V.
Nominal voltage/ Power input see ordering information Protection class: electric IP55 mechanical IP20 Dead volume: 8.5 ml Materials of parts in contact with mediums by pump type.