Примери за използване на Intake manifold на Английски и техните преводи на Български
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Ecclesiastic
-
Computer
Replace the intake manifold cover.
Intake manifold electric flap motor.
Place two gaskets on the intake manifold.
This is your intake manifold, and on top of it?
Clean and remove the damper from the intake manifold.
Nozzle for intake manifold 65 mm Welcome to our store!
Do you know how to fix the intake manifold leak?
The intake manifold is under pressure during most running conditions when an engine is turbocharged.
CF2 and CF3 engines have plastic valve cover and variable-length intake manifold.
The intake manifold distributes the airflow through the cylinders of the engine and gives the air the necessary discharge.
They are injected without reaching the combustion chamber- in the intake manifold.
If you remove the intake manifold cover, located behind the carburetor, you will see two holes with rubber flaps over them.
Attach 2 feet of vacuum line to the connector on the intake manifold cover.
This meant that fuel was sprayed into the intake manifold behind each intake valve instead of directly into the cylinders.
With a 7/16 wrench,remove the two nuts that hold the carburetor body to the intake manifold.
Mk3 jetta tdi tended to wear out the rubber hose before the intake manifold because it's close to the hot exhaust piping.
The other part of a carburetor's function is handled by a mixer mounted in the intake manifold.
Carbon deposits can also accumulate on the throttle body and intake manifold as well as in the catalytic converter and on oxygen sensors.
Home› Components for gas injection systems› Adjacent components andaccessories› Nozzle for intake manifold 65 mm.
To do this, many of its components had to be reworked(for example, the intake manifold was deployed, the crankshaft was lowered, the radiator was tilted).
Contacts Home GIS adjacent components and accessoriesNozzles andadapters for injectorsNozzle for intake manifold 65 mm.
When there is a high level of vacuum in the intake manifold(e.g. idling), MAP output signal is relatively low and the onboard controller provides less fuel.
If the sensor is reading out of range,check the sensor's connection to the intake manifold for a possible vacuum leak.
The Boost Pressure Sensor, in turn, is used in turbocharged engines andlocated between the turbocharger and intake manifold.
Trim the length of the vacuum line plug so that The intake manifold cover will hold the plug in place so that it may not fall out of position.
Such a device is traditionally located either on the body of the thermostat of the intake manifold, or on the cylinder head.
Anti shudder valve shut or almost shut(does not apply to mk3 tdi,more for mk4 tdi)- there is a spring loaded valve right before the intake manifold.
The intake valves close much earlier than usual;in connection with increased pressure in the intake manifold, this reduces throttling losses during aspiration.
To facilitate the launch of the diesel engine in cold weather, a system plugs warming,which is electronically controlled glow plugs installed in the intake manifold.
The 999 cm3 award-winning engine contains a turbocharger with electric wastegate actuator, an intake manifold with integrated intercooler and an exhaust manifold integrated into the cylinder head.