Примери коришћења Thermal efficiency на Енглеском и њихови преводи на Српски
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
-
Latin
-
Cyrillic
Thermal efficiency is high.
Main article: Thermal efficiency.
As compared to other combustion engines, internal or external,the diesel engine has the highest thermal efficiency.
This can make the thermal efficiency greatly increased, improve the economy of heat exchanger equipment.
However, this material itself is porous,which reduces the thermal efficiency of the structure.
A pitched roof significantly improves the thermal efficiency of the building thanks to the natural ventilation underneath the top roof layer.
Different angles of sunshine should be applied to different technologies to get the maximum thermal efficiency.
Together, these parameters tend to increase core thermal efficiency and improve fuel efficiency. .
Will achieve efficiency in the mid 40% range,with the most efficient units approaching 50% thermal efficiency.
Raising turbine inlet temperature tends to increase thermal efficiency and, therefore, improve fuel efficiency. .
Industrial gas turbines for power generation GE H series power generation gas turbine: in combined cycle configuration,this 480megawatt unit has a rated thermal efficiency of 60%.
With its ability to improve a building's thermal efficiency and maximise natural light, polycarbonate plastic is becoming increasingly popular in architecture.
This year, Mercedes' engine hit a landmark achievement on the dyno when it broke the 50% thermal efficiency barrier for the first time.
Aluminum thermal conductivity is good,so the thermal efficiency of aluminum Wine Making Equipment is high, save fuel, and the wine is fast, the high rate of wine.
Fan comes about 3- 5 seconds only when you give go of the PC(not from sticking fan I think it's set so)over 30% load even hitting the thermal efficiency values that I do not know….
Since metal heat sinks are better thermal conductors than TIMs,optimal thermal efficiency is achieved by minimizing the thickness of the TIM and eliminating excess material.
A modern large electrical power station(producing several hundred megawatts of electrical output) with steam reheat, economizer etc. will achieve efficiency in the mid 40% range,with the most efficient units approaching 50% thermal efficiency.
An internal regenerative heat exchanger increases the Stirling engine's thermal efficiency compared to simpler hot air engines lacking this feature.
By comparison, the V8 engines pre-2014 achieved thermal efficiency of 29% and the 1st iteration of the Mercedes V6 turbo in 2014 managed 40 percent thermal efficiency. .
The insulation jackets, tank& drum heating jackets and infrared heaters we developed not only greatly reduce energy consumption,through increasing thermal efficiency, improving the quality of products and working environment.
This kind of dryer does not use dry medium, high thermal efficiency, the product is not contaminated, but the drying ability is limited by the heat transfer area of the metal wall, the structure is more complex, often operate in a vacuum;
Aluminum heat conduction performance is good, so the aluminum wine equipment thermal efficiency is very high, save fuel, and out of wine fast, the wine rate is high.
A new 2.4litre V6 turbo-charged petrol engine,with optimised thermal efficiency, made its race debut at Silverstone, as did an upgraded hybrid system, with lighter and smaller motor generator units, which recover and deploy 8MJ per lap at Le Mans.
The primary effect of regeneration in a Stirling engine is to increase the thermal efficiency by'recycling' internal heat that would otherwise pass through the engine irreversibly.
For all other renovations, several green improvements are required,including improving the thermal efficiency of your home by the addition or replacement of weather stripping, caulking or sealing all openings to the outside of the home, insulating all wall and ceiling areas that were exposed due to your renovations, and ventilating any attic and crawl space areas[source: HUD].
Cowell revealed that the Mercedes power unit is now achievingmore than 45 and close to 50 percent thermal efficiency, i.e. 45- 50 percent of the potential energy in the fuel is delivered to the crankshaft, and efficiency of more than 50 percent when the ERS is operating at full power.
The development of steam engines required engineers to develop concepts andformulas that would allow them to describe the mechanical and thermal efficiencies of their systems.
Increasing the energy efficiency of thermal energy production;