在 中文 中使用 路由协议 的示例及其翻译为 英语
{-}
-
Political
-
Ecclesiastic
-
Programming
所有链路状态路由协议应用Dijkstra算法来计算最佳路径。
路由协议确定每个网络的最佳路径或路由。
Routing protocols determine the best path, or route, to each network.在R2和R1之间运行路由协议会浪费资源。
所开发的两个原始IPv4路由协议是RIPv1和IGRP。
The two original IPv4 routing protocols developed were RIPv1 and IGRP.只有两个链路状态路由协议，即OSPF和IS-IS。
There are only two link-state routing protocols, OSPF and IS-IS.Combinations with other parts of speech
用动词使用
更多的
RRAS中使用的四种主要路由协议类型是：.
The four main types of routing protocols that are used in RRAS are:.例如，IPv4路由协议分类如下：.
For example, IPv4 routing protocols are classified as follows:.ISO还负责创建路由协议的标准。
ISO is also responsible 多路径路由可以与大多数路由协议一起使用，因为它是一个限于单个路由器的每跳决策。
Multi-path 要选择最佳路径，路由协议必须能够评估和区分所有可用的路径。
To select the best path, the routing protocol must be able to evaluate and differentiate among the available paths.路由器运行路由协议，不断地检查所有已知IP目标的可用的路由。
Routers run routing protocols which constantly check on the availability of routes to all known IP destinations.RIP路由协议更新至RIPv2，可支持网络环境的发展。
The RIP routing protocol was updated to accommodate growth in the network environment, into RIPv2.链路状态路由协议可以为每一条链路设置一个链路开销来标示此链路的路径长度。
Link-state routing protocols allow you to assign a link cost for each link to identify the path length of a link.如果路由协议不知道如何到达目的地，它将不会将数据包发送到该目的地。
If a routing protocol does not know how to get to a destination, it will not send the packet to that destination.在路由协议中，只有BGP使用TCP作为传输层协议。
Among routing protocols, BGP is unique in using TCP as its transport 动态路由协议更新过程会对一个路由器转发数据帧的能力产生重大的影响。
The processing of dynamic routing protocol updates could have a significant impact on the ability of a router to forward data frames.路由协议允许路由器动态共享远端网络的信息以及自动将这信息添加到自己的路由表中。
Routing protocols allow routers to dynamically learn information about remote networks and automatically add this information to their own 路由协议（例如RIP）用于将两个网络系统之间的路由变化传输到相关系统中。
Routing protocols such as RIP are used to pass on modifications to the Router between two networked systems to the systems concerned.他们还需要知道哪个动态路由协议最适合特定的网络环境。
They also need to know which dynamic routing protocol is most appropriate in a particular network environment.RIP是最简单的动态路由协议，用于本部分来提供基本的路由协议理解。
RIP is the simplest of dynamic routing protocols and is used in this section to provide a basic level of 为了支持动态路由协议，也需要配置Tunnel接口的网络地址。
To support dynamic routing protocol, you also need to configure the tunnel interface with a network address.除了多播路由协议提供的信息之外，路由器使用多播作用域来确定是否可以转发多播通讯。
In addition to using information provided by multicast routing protocols, routers use the multicast scope to determine whether they can forward multicast traffic.这些路由协议已分别演变为无类路由协议RIPv2和EIGRP。
These routing protocols have evolved into the classless 路由协议－例如babel－实时通过合并链接找到两个设备之间最快的路径。
The routing protocol- babel for example- finds at any time the fastest route between two device by combining links.我们继续拿路标来做类比，使用链路状态路由协议就好比是拥有一张完整的网络拓扑图。
To continue our analogy of sign posts, using a link-state routing protocol is like having a complete map of the network topology.动态路由协议要求更多的CPU处理工作，并且还需要使用一定量的链路资源用于路由更新和通信。
Dynamic routing protocols require more CPU processing and also use a certain amount of link capacity for 路由协议允许路由器动态共享远端网络的信息以及自动将这信息添加到自己的路由表中。
Routing protocols allow routers to dynamically share information about remote networks and automatically add this information to their own 尽管IS-IS路由协议一直主要供ISP和电信公司使用，但已有越来越多的公司开始使用IS-IS。
Although IS-IS has been known as the routing protocol used mainly by ISPs and carriers, more enterprise networks are beginning to use IS-IS.这里讨论的大多数路由协议可以仅用于IPv6路由信息的交换。
Most of the routing protocols discussed here can be used only for the exchange of IPv6 
