STANDARD TEST METHOD 한국어 뜻 - 한국어 번역

['stændəd test 'meθəd]
['stændəd test 'meθəd]
표준 시험 방법
standard test method
standard test method
테스트를 기준 으로 합니다
표준 테스트 방법
standard test method
기준 시험 방법

영어에서 Standard test method 을 사용하는 예와 한국어로 번역

{-}
  • Colloquial category close
  • Ecclesiastic category close
  • Ecclesiastic category close
  • Programming category close
  • Computer category close
Standard Test Method: ASTM E1530.
표준 테스트 방법: ASTM E1530.
All data is based on Canon's Standard Test Method.
모든 데이터는 캐논의 테스트를 기준으로 합니다.
ASTM D 523 Standard Test Method for Secular Gloss.
세속적인 광택을 위한 ASTM D 523 기준 시험 방법.
All data is based on Canon's Standard Test Method.
ㆍ모든 데이터는 캐논의 테스트를 기준으로 합니다.
ASTM E1820 Standard Test Method for Measurement of Fracture Toughness.
ASTM E1820 파괴인성 측정에 관한 표준시험방법.
Characteristic Specification EN14411 Standard Test Method.
특성 스펙 EN14411 표준 시험 방법.
ASTM D 3786 Standard Test Method for Hydraulic Bursting Strength of Textile Fabrics.
직물 직물의 유압 파열 힘을 위한 ASTM D 3786 기준 시험 방법.
The fraction of fines can be determined by sieving using EDANA Standard Test Method WSP 220.2(5).
미립자의 분획은 EDANA 표준 시험 방법 WSP 220.2(5)를 이용하여 체질함으로써 결정될 수 있다.
Standard Test Method for Static and Kinetic Coefficients of Friction of Plastic Film and Sheeting.
플라스틱 필름 정적 및 키네틱 마찰 대한 표준 시험 방법.
Woodward Module 9905-003 Standard Test Method For Pour Point Of Petroleum Products.
Woodward 단위 9905-003 표준 시험 방법은을 위한 석유 제품의 유동점을.
ASTM D 2303 Standard Test Methods for Liquid-Contaminant, Inclined-Plane Tracking and Erosion of Insulating Materials.
ASTM D 2303 단열재의 액체 오염물질, 기울어지 비행기 추적 및 부식을 위한 표준 시험 방법.
The coefficient of static and sliding friction can be measured using ASTM test D1894(Standard Test Method for Static and Kinetic Coefficients of Friction of Plastic Film and Sheeting).
정적 마찰 계수 및 슬라이딩 마찰 계수는 ASTM 시험 D1894 (플라스틱 필름 및 시팅의 정적 및 키네틱 마찰 계수에 대한 표준 시험 방법)을 사용하여 측정될 수 있다.
ASTM D1500- Standard Test Method for ASTM Color of Petroleum Products(ASTM Color Scale).
ASTM D1500 Standard Test Method 대 한 ASTM 색 의 석유 Products (ASTM 색 Scale).
The American Society for Testing and Materials(ASTM) recently published an official standard method with the RapidOxy 100 under the title"ASTM D8206: Standard test method for oxidation stability of lubricating greases- Rapid Small Scale Oxidation Test(RSSOT).”.
ASTM(American Society for Testing and Materials)은 최근에 "ASTM D8206: 윤활 그리스의 산화 안정성에 대한 표준 테스트 방법 - RSSOT(급속 미량 산화 안정도 테스트)”라는 제목으로 RapidOxy 100을 이용한 공식 표준 방법을 발표했습니다.
ASTM D3039/ D3039M Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials.
ASTM D3039 / D3039M 폴리머 매트릭스 복합재료의 인장특성에 관한 표준시험방법.
California has updated its regulations with the new 2005 ASTM standards F 2412-05, Standard Test Methods for Foot Protection and ASTM F 2413-05, Standard Specification for Performance Requirements for Foot Protection.
California는 새로운 2005 ASTM 표준 F 2412-05, 발 보호 표준 테스트 방법 및 ASTM F 2413-05, 발 보호 성능 요구 사항 표준 표준을 업데이트했습니다.
One standard test method, ASTM F1608, measures the“filtration” efficiency of a substrate to remove spores from an aerosol being forced through the substrate in an air stream.
표준 시험 방법 중 하나인 ASTM F1608은 대기 중에서 기판을 통과하는 에어로졸에서 포자를 제거하는 기판의 "필터링" 효율성을 측정합니다.
The test was done as per the requirements of ASTM C1260(Standard test method for potential alkali aggregate reactivity of aggregates mortar bar method)..
석회석미분말의 혼입률에 따른 알칼리-실리카반응 분석을 위하여 ASTM C 1260 “Standard Test Method for Potential Alkali Reactivity of Aggregates (Mortar- Bar Method)”에 의거하여 실험을 수행하였다.
ASTM D785- 08(2015) Standard Test Method for Rockwell Hardness of Plastics and Electrical Insulating Materials.
ASTM D785 - 08(2015) 플라스틱과 전기 단열재의 록웰 경도를 위한 표준 시험 방법.
High long-term thermal resistance(LTTR) insulation values per CAN/ULC-S770, Standard Test Method for Determination of Long-term Thermal Resistance of Closed-cell Thermal Insulating Foams, testing;.
년 캐나다 표준협회 및 Underwriters Laboratories of Canada는 CAN/ULC-S770, “Standard Test Method for Determination of Long Term Thermal Resistance of Closed-Cell Thermal Insulation Foams”를 발표했습니다.
ASTM E96 -16 Standard Test Methods for Water Vapor Transmission of Materials.
투습성은 ASTM E96M(12 Standard test methods for water vapor transmission of materials)에 의해 측정하였다.
Existent Gum Tester for Fuel(Steam jet evaporation method) This instrument is designed and made as per standards GB/T 8019 Standard test method for gum content in fuels by jet evaporation and ASTM D381Standard test method for gum content in fuels by jet evaporation. It is….
연료에 대한 기존 껌 테스터 (증기 젯 증발 법)이 장비는 제트 증발에 의한 연료의 껌 함량에 대한 표준 테스트 방법 및 제트 증발에 의한 연료의 껌 함량에 대한 ASTM D381 표준 테스트 방법에 따라 표준 GB / T 8019에 따라 설계 및 제작되었습니다. 그것은 결정하는 데 적합합니다….
ASTM G-151 Standard Test Method for non metallic materials exposed to accelerated test equipment using laboratory light sources.
ASTM G-151 비 금속 물자를 위한 표준 시험 방법은 실험실 광원을 사용하여 가속 시험 장비에 드러냈습니다.
Guangzhou International Standard Experimental apparatus sealed Standard GB/ T 15171 -1994 pieces of flexible sealing performance test method ASTM D 3078 -94 exhaust measured by Standard Test Method for flexible packaging leak Principle instrument Compressed air as power source to the vacuum generator for energy conversion devices, computer-controlled high-precision pressure sensor to achieve the vacuum speed, high precision, digital set pa….
포장 설비 유한 공사 광주 국제 표준 실험 장치는 밀폐 표준 유연한 씰링 성능 테스트 방법의 GB / T 15171 -1994 조각 유연한 포장 누설에 대한 표준 시험 방법으로 측정 ASTM D 3078 -94 배출 원리의 악기 압축 공기 에너지 변환 장치, 디지털 설정 매개 변수는 테스트 프로세스 및 기타 우수한 특성을 만들기 위해 프로그래밍할 수 있습니다 진공 속도, 높은 정밀도를 달성하기 위해 컴퓨터 제어 고정밀 압력 센서 진공 발생기의 전원 소스로.
ASTM E741, Standard Test Method for Determining Air Change in a Single Zone by Means of a Tracer Gas Dilution.
은 주제어실 거주성 평가에 대해 ASTM E 741 ”Standard Test Method for Determining Air Change Rate in a Single Zone by means of a Tracer Dilution”의 사용을 의무화하고 있다.
ASTM C 672: Standard Test Method for Sealing Resistance of Concrete Surfaces Exposed to Deicing Chemicals.
제설염에 대한 저항성 실험은 ASTM C 672 “Standard Test Method for Scaling Resistance of Concrete Surface Exposed to Deicing Chemicals”에 명시되어진 방법으로 수행하였다.
ISO 20482:2013 specifies a standard test method for determining the ability of metallic sheets and strips having a thickness from 0,1 mm up to 2 mm and a width of 90 mm or greater to undergo plastic deformation in stretch forming.
ISO 20482:2013는 0,1 mm에서 간격이 90 mm의 2개까지 mm 및 폭 또는 뻗기 형성에 있는 플라스틱 개악을 치루게 더 중대한 있는 금속 장의 능력을 및 지구 결정을 위해 표준 시험 방법을 지정합니다.
SS chambers are salt spray chambers meet ASTM-B117, ISO, IEC andother International Standards test methods.
SS 약실은 소금 분무기 약실 대회 ASTM-B117, ISO,IEC이고 다른 국제 기준은 방법을 시험합니다.
Tungsten Copper Alloy News, Price and Information Service Provide all the customer with website about tungsten copper alloy in various of language version which covers almost all the content aboutWCu such as introduction, knowledge, academic research, patent, price, producing method, packing, delivery, national standard, testing method and equipment which helps customer to have a clear acknowledgement of WCu.
텅스텐 구리 합금 뉴스, 가격 및 정보 서비스 도입, 지식, 학술 연구, 특허, 가격, 생산 방법, 포장, 납품,국가 표준, 시험 방법 및 장비와 같은 WCu에 대한 거의 모든 내용을 포함하는 다양한 버전의 텅스텐 구리 합금에 대한 웹 사이트를 모든 고객에게 제공하십시오. 고객이 WCu에 대한 명확한 인정을받을 수 있도록 도와줍니다.
결과: 29, 시각: 0.0466

영어 문장에서 "standard test method"를 사용하는 방법

Standard Test Method for Same-Different Test.
Standard test method for particlesize analysis.
Standard Test Method for High-Strain Dynamic.
D4606-95(2000) Standard Test Method for Determination of.
ASTM C773-88(2016) Standard Test Method for .
ASTM C773-88(2011) Standard Test Method for .
Standard Test Method for Sampling and .
Standard Test Method for Determining Air .
Standard Test Method for Relative Density .
Standard Test Method for Slake Durability of.
자세히보기

한국어 문장에서 "표준 시험 방법"를 사용하는 방법

표준 시험 방법 중 하나인 ASTM F1608은 대기 중에서 기판을 통과하는 에어로졸에서 포자를 제거하는 기판의 "필터링" 효율성을 측정합니다.

단어 번역에 의한 워드

최고 사전 질의

영어 - 한국어