Mga halimbawa ng paggamit ng Voltages sa Ingles at ang kanilang mga pagsasalin sa Tagalog
{-}
-
Ecclesiastic
-
Colloquial
-
Computer
And then instead of talking about voltages.
The only critical voltages are those across R3 and R8.
Has anyone found an answer to this one voltages?
Voltages or currents, which are continuous fluctuations;
Derating may be needed under low input voltages.
Voltages or currents, which are transient(aperiodic and vibrational).
Wide range of generator supply voltages, e.g. 12VDC or 480VAC-3P.
If all voltages of AC and DC, in hazardous locations.
They do not need to prepare too much inventory for different voltages.
Complete motor control devices for voltages up to 1000(single product).
Other voltages, such as 380V, 415V, etc., will be matched with 2.5 πr cables.
Power cables for non-stationary laying for voltages above kV.
Voltages, laser bias current, transmit optical power, receive optical power.
The protection classes, on the other hand,specify the contact voltages.
Different voltages can be in accordance with customers' requirements.
The reason for this is that in North and South America,outlets use voltages ranging from 100-127 volts.
Remarks Special voltages needs can call the inquiry of the company.
Protect motors and other equipment from unstable voltages in the power supply system.
Circuit voltages for a 9-volt power supply are shown in the schematic diagram Fig. 1.
My OS any more specific questions,Speedfan to check the voltages of my power supply.
Opto-isolators prevent high voltages from affecting the system receiving the signal.
Power cables with plastic andpaper insulated cables for fixed wiring at voltages above 1 kV to 35 kVA 8544.
This also applies voltages and masses which can not come into contact with other potentials.
They were created by an excess of energy, especially high temperature, pressure,electric currents and voltages.
That is, voltages must be applied in a specific sequence, otherwise the system can be damaged.
Power-supply sequencing: Sequential turn-on andoff of power supplies may be required in systems with multiple operating voltages.
Commercially available opto-isolators withstand input-to-output voltages up to 10 kVand voltage transients with speeds up to 25 kV/μs.
If the voltages in your unit differ more than 20% from those in the schematic, try changing resistor values to get the voltages in their proper range.
They also provide a signal to the motherboard to indicate when the DC voltages are in spec, so that the computer is able to safely power up and boot.
These voltages accelerate the particles very fast, fast enough to tear all the electrons off of oxygen when it hits the atmosphere.".
