Examples of using Return pipe in English and their translations into Arabic
{-}
-
Colloquial
-
Political
-
Ecclesiastic
-
Ecclesiastic
-
Computer
Water Return Pipe. .
Air Compressor Water Return Pipe.
Integrated return pipe and highly efficient thermal insulation.
The bottom is returned to the pump through the return pipe.
Sensor on tank return pipe: NTC10K.
Use return pipe between the balance chamber and front section.
Adopt the constant-pressure variable peristaltic pump, cancel the return pipe. The.
Flow and return pipes may be filled on the left or the right side of the manifold.
In the balance between the chamber body and the suction pipe with return pipe.
Flow and return pipes may be fitted on the left or the right side of the manifold.
The peristaltic pump with constant pressure andvariable eliminates the need for a return pipe.
And to ensure that the oil return pipe must be no obstruction, to ensure the normal unloading.
The cooling system of themachine tool is composed of cooling pump, outlet pipe, return pipe, switch and nozzle, etc.
Angle of return pipe below 30° to horizontal for LO smooth return, otherwise oil leaks from T/C.
When the liquid level in the empty can blocks the gas return pipe mouth, then the filling stops.
Inside liquid comes to air return pipe of filling valve, the system will stop filling, Liquid in the tank is.
There are 4 pipe connectors on the directional valve,which is two of main grease supplying pipe and two grease return pipe.
Was opened and start filling, then finished when the return pipe was blocked by the filling liquid. The filled.
Return pipe must be long enough and put straight into the filter, the end should be beveled, pay attention to check blockage;
The filtered vacuum pump oil is recycled along with the return pipe, and the oil-free exhaust gas is discharged, thereby achieving a pollution-free and clean effect.
The lubricating oil is transferring to its lubrication point through check valve, shuttle valve, binoculars mesh filter and oil cooler discharged from the hydraulic pump andreturn to oil reservoir by main return pipe and filter.
CLQ magnetic filter is used for oil lubrication system/equipment,CLQ type is installed in the end of the oil return pipe, the oil flows into lubrication system through the magnetic filter into the tank, it can filter out the magnetic impurities than other filters.
The separator deflects the aspirated air through a lamellar system so that dust and chaff are separated from the air and discharged by an airlock valve while the cleanedair is recycled by the fan in the air return pipe to the destoner.
Advantages and benefits Short installation times due to complete pre assembled collectors Simple and reliable connection technology in order to extend several collectors side by side through pre assembled screw connections Further tubing andan extensive thermal insulation is not necessary Integrated return pipe and.
Hydraulic Power Unit complete with suction filter, return oil pipe and air breather.
Inside the machine equipped with grease adding pipe and return air pipe, open structure, low residual, discharge rapidly, the overall structure is reasonable, convenient operation and maintenance;
Hydraulic Power Pack complete with suction filter, return oil pipe and air breather.
Hydraulic Power pack complete with suction filter, remote, return oil pipe and air breather.
Whether the oil returning oil pipeline is installed correctly,the return oil pipe is not allowed to install the valve.